Quick Reference Guide
Using a Host Interface to Supply Power
Some hosts can provide power to the cradle via the host interface, instead of an
external power supply.
Troubleshooting
If the cradle is not operating:
• Check the system power.
• Check for loose cable connections.
• Check that the scanner, and/or battery where applicable, is inserted properly in
the cradle.
• Check that the host settings are correct and the cradle is connected to the
appropriate port on the host.
CAUTION
Do not pour, spray, or spill any liquid on the cradle.
Maintenance
???
• Protect the cradle from temperature extremes.
• Do not store or use the cradle in any location that is extremely dusty, damp, or
wet.
• Use a soft cloth to clean the cradle. If the surface of the cradle becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
Mounting Templates
Refer to the MT2070/ MT2090 User Guide (p/n 72E-117859-xx) for mounting
templates for the single slot cradle, four slot cradle and four slot battery charger.
DRAFT
???
13
???