Philips 9000 Series Manual page 41

Shaver
Problem
The appliance does
not work when I
press the on/off
button.
The appliance d oes
not shave as well as
it used to.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
A shaving unit
symbol has
suddenly appeared
on the display.
Possible cause
The appliance is
still attached to
the wall socket. For
safety reasons, the
appliance can only
be used without cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged to
such an extent that
the motor cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset
the appliance.
This symbol reminds
you to replace the
shaving heads.
40
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery (see
'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace them.
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads
in the regular way or clean
them thoroughly.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
Replace the shaving heads
(see 'Replacement').