Table of Contents
Advertisement
Quick Links
Operating instructions
Safety-monitoring module
Operating instructions. . . . . . . . . . . .pages 1 to 12
EN
Original
Content
1
About this document
1.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Target group: authorised qualified personnel. . . . . . . . . . . . . . . . . .1
1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.4 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.6 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.7 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
2.1 Ordering code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.2 Special versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.3 Destination and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.5 Derating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.6 Safety classification of semi-conductor output. . . . . . . . . . . . . . . . .3
3
3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
4
4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .3
4.2 Coding of connecting terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
5
5.1 Description of the terminals and LED indications . . . . . . . . . . . . . .4
5.2 Adjustable applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5.3 Changing setting or application . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
6
6.1 LED indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6.2 Malfunctions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SRB-E-204ST / SRB-E-204PE
7
7.1 Possible applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.2 Application example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
7.3 Start configuration SRB-E-204ST . . . . . . . . . . . . . . . . . . . . . . . . . .9
7.4 Feedback circuit SRB-E-204ST . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7.5 Cascading SRB-E-204PE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
7.6 Sensor configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
8
8.1 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
8.2 Functional testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
8.3 Behaviour in the case of faults. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
8.4 Setting report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9
9.1 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10.1 Wiring/circuit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. About this document
1.1
Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety-monitoring module. The
operating instructions must be available in a legible condition and a
complete version in the vicinity of the device.
1.2
Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components.
1.3
Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
EN
1
Advertisement
Table of Contents
Related Manuals for schmersal SRB-E-204ST
Summary of Contents for schmersal SRB-E-204ST
-
Page 1: Table Of Contents
7.3 Start configuration SRB-E-204ST ......9 7.4 Feedback circuit SRB-E-204ST ......9 7.5 Cascading SRB-E-204PE . -
Page 2: Appropriate Use
0.25 … 1.5 mm² Further technical information can be found in the Schmersal Only if the action described in these operating instructions is catalogues or in the online catalogue on the Internet: carried out correctly will the safety function be safeguarded, www.schmersal.net. -
Page 3: Technical Data
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Technical data Derating General data No derating with individual installation of modules. Standards: EN 60204-1, IEC 60947-5-1; ISO 13849-1, Derating on request if several modules are installed one after the IEC 62061, IEC 61508... -
Page 4: Coding Of Connecting Terminals
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Coding of connecting terminals S3 1 S3 2 S4 1 S4 2 S3 1 S3 2 S4 1 S4 2 S11 S1 2 S2 1 S2 2 S11 S1 2 S2 1 S2 2... -
Page 5: Adjustable Applications
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Adjustable applications SRB-E-204ST Rotary knob Reset button (detection Cross-wire Sensor Input / Sensor Monitoring of sensor channels position of the trailing edge) monitoring active configuration for synchronisation (< 5 sec.) 1 – 4 NC / NC 1 –... -
Page 6: Changing Setting Or Application
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Changing setting or application Description / procedure Rotary (mode) switch System response LED indications In 1 In 2 Factory setting Position 1 Ready for application 1 Switch operating voltage on Position 1 Without connected sensors! -
Page 7: Diagnostic
Inputs S12 and S22 closed Continuously lit Other fault codes: In 1/2 Time window for synchronicity exceeded Flashes quickly Consult technical sales dept. at Schmersal Second channel has not opened Flashes slowly Inputs S32 and S42 closed Continuously lit In 3/4... -
Page 8: Application Example
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Application example Dual-channel control, shown for a guard door monitor with two position switches where one has a positive break contact; with external reset button • Relay outputs: Suitable for 2-channel control, for increase in capacity or number of contacts by means of contactors or relays with positive-guided contacts •... -
Page 9: Start Configuration Srb-E-204St
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Start configuration SRB-E-204ST Sensor configuration 7.3.1 Monitored start • Different protective equipment can be monitored. • Manual start or activation of the module occurs when the button is See examples as follows released. -
Page 10: Set-Up And Maintenance
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Differentiated cross-fault monitoring of sensors Dual channel signal processing NC / NO (Sensor 1 – 4) (Category 4 – PL e to ISO 13849-1 possible) (Category 4 – PL e to ISO 13849-1 possible) -
Page 11: Setting Report
Operating instructions Safety-monitoring module SRB-E-204ST / SRB-E-204PE Setting report 9. Disassembly and disposal This report regarding the setting of the device must be completed accordingly by the customer and enclosed in the technical Disassembly documentation of the machine. The safety-monitoring module must be disassembled in a de-energised condition only. -
Page 12: Eu Declaration Of Conformity
Philip Schmersal Managing Director The currently valid declaration of conformity can be downloaded from the internet at www.schmersal.net. K. A. Schmersal GmbH & Co. KG Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Phone:...
Need help?
Do you have a question about the SRB-E-204ST and is the answer not in the manual?
Questions and answers