Heritage Bathrooms Clifton Quick Start Manual

Clifton Accessories.
Congratulations on your purchase of this high quality Clifton bathroom accessory. Before commencing
with the installation, please carefully read the instructions on how to assemble & maintain your product.

Installation.

1. Check all components are present & correct before starting installation.
2. Single wall fixing: Establish the position for the accessory & mark out the fixing holes using the wall bracket as a
template.
3. Double wall fixing: Either use the accessory as a template to establish the position for the wall & mark out the
fixing holes, or measure the distance between the fixing holes.
4. Drill holes to suit & insert the wall plugs (supplied) if required.
5. Screw the wall bracket (2) to the wall with the screws (3) provided.
6. Loosen off the screws (3) (but don't remove) in the accessory & place the accessory over the wall bracket with the
screws.
7. Tighten up the screws (3) until the accessory is secure against the wall.
8. See the back page for aftercare instructions
Contents.
1. Wall plug
2. Wall bracket
3. Screw
4. Accessory
5. Grub screw
Please keep these instructions for future reference
Before starting any installation project please consider the following:
Prior to drilling into walls, check there are no hidden electrical wires
or cables or water supply pipes with the aid of an electrical detector.
If you use power tools do not forget:
- Wear eye protection
- Unplug equipment after use