Summary of Contents for Koo-di KD430
- Page 1 Instruction booklet KD430 koo-di Duo Wooden Highchair IMPORTANT Please read instructions carefully and keep for future reference © Weybury Hildreth Ltd. 2018...
- Page 2 Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING • FOLLOW THE MANUFACTURER’ S INSTRUCTIONS. • DO NOT USE THE HIGHCHAIR UNTIL THE CHILD CAN SIT UP UNAIDED. • DO NOT LEAVE CHILDREN UNATTENDED. •...
-
Page 3: Safety Precautions
Safety Precautions • Always keep your child in view whilst in the highchair. • The tray is not designed to hold the child in the highchair, but we do recommend the tray is secured in place whilst the child is in the highchair. - Page 4 What’s in the box You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact us by email – hello@koo-di.com. threaded holes u p p e r front seat...
- Page 5 Connecting the upper front the legs, and the fitting the footrest Locate the two upper front legs. Ensure they are the legs that have the threaded holes. As in Fig.1 below, screw the upper front leg into the base of the highchair clockwise. Ensure that the threaded holes are facing the front.
- Page 6 Connecting the upper rear legs & lower legs Locate the two upper rear legs. Line up the screw and the hole and turn clockwise until the leg is secure as in Fig. 2. Do not over-tighten. Repeat for opposite side. The highchair should be the same as the image in Fig.3 Fig.2 Fig.3...
- Page 7 Converting high chair to low seat mode The highchair can also be converted into a low chair. Simply remove both upper and lower legs, then refit the 4 lower legs directly into the bottom of the seat. Ensure the legs are secure - Do not over-tighten. Repeat step 6 on page 5, rotating the feet to ensure the seat sits flush on the floor before use.
-
Page 8: Safety Note
Attaching, removing and adjusting plastic tray Safety Note: The plastic tray can be adjusted and has three positions, it should always be position as near to the child as is comfortable. To attach the tray see Fig.6. Align the tray with the arm rests, push the button at the front of the plastic tray while sliding tray along armrests to desired position then release the button. - Page 9 Securing and adjusting the safety harness To secure your child in harness, push buckle (A) and (B) into the buckle housing (C) until the buckle prongs snap into position. Carefully adjust the harness by pulling the slider (D) until the desired t is achieved in the lap, shoulder and crotch strap.
- Page 10 Do not use bleach, harsh chemicals or scourers as this will damage the seat material, plastic parts and wooden legs Weybury Hildreth Ltd. Bay 1& 2,Building 47 Second Avenue, The Pensnett Estate, Kingswinford, West Midlands, DY6 7UZ. email: hello@koo-di.com tel: +44(0)1384 298531 visit koo-di.com...
Need help?
Do you have a question about the KD430 and is the answer not in the manual?
Questions and answers