Page 2
APPLY LABELS Insert chamber onto base as shown. Apply labels as shown. HELPFUL HINT: Apply labels before assembly. ASSEMBLY Connect panels together using snap-on fasteners. Make sure that the flat ends are flush in the middle as shown. Fasteners Connect small track to chamber should be attached to outside of chamber.
Page 3
Assemble the charger. Slide track through the charger as shown. Make sure to align hole in the middle of the track with the center of the charger. Long track From step 7. Short track From step 8.
Page 4
Long cardboard Short cardboard Slide the cardboard parts into each side by lifting up the chamber as shown. Insert launching flags as shown. Reset flags to play again. FINAL ASSEMBLY From step 10.
Page 6
CHARGE/RE-CHARGE TO PLAY OPERATING TIPS Charge your vehicle. Adjust track side walls at each Watch the glo-streaking action as your vehicle travels around the track! connection point as shown. The vehicle will speed around the default track until you press down the lever. Push until you hear a "click"...
Need help?
Do you have a question about the Hot Wheels Turbo Glo Turbo Tunnel and is the answer not in the manual?
Questions and answers