Firmware Update - Snom M900 Admin And Installation Manual

Admin and Installation Guide M900
F
irmware update
Setting
Firmware update server
address
Firmware path
Terminal file path
Type
Required version
(base station, handset,
repeater, headset)
Required branch
(base station, handset,
repeater)
Voice prompts
v1.02
Description
IP address or DNS of update source
Valid inputs: URL or IP address. Note: Cannot end with slash / character.
Examples: http://dect.snom.com, 10.10.104.41
Default: empty.
If required, location of firmware on server or firmware update server path
where firmware update files are located. Note: Must begin with slash /
character.
Example: /M700_v0450.fwu
Default: empty.
Not applicable.
Setting: empty
All types of handsets and repeaters (i.e., M65, M85, M25, M5) that have been
registered at the base station, even when all devices of any type are turned
off.
Version of firmware the type of device is to be upgraded to. Note: Value 0 will
disable firmware upgrade.
Valid input: 8-bit string
Example: 450
Default: 0.
Branch of firmware the type of device is to be upgraded to.
Valid input: 8-bit string
Example: 5
Default: empty.
For headsets only: Name of the voice prompt file
57
Description of Settings