Exposure Lights VERSO Mk2 User Manual

CHARGING

Fully Charge your light before first use.
Locate the charge port by pulling away the Storm Cap.
Fully insert the charging cable and begin charging.
An LED behind the Function Button will flash green to indicate
that it is charging and then go solid green when the light is
95% charged and the remaining 5% is trickle charge.
Approximate charge times from a 500mA supply are 1 hour.
IMPORTANT: After charging is complete correctly replace the storm-cap to prevent water ingress.

LIGHT OPERATION

Located on the side of the Verso is the Function Button.
This operates the light and informs you of the mode and the
battery power status.
To turn on the light, double click the Function Button, the light
turns on in the lowest mode.
To switch between the constant settings, press the Function
Button once. When the setting is changed the colour of the button
for the first 3 seconds informs you which lighting mode has been
selected. Green is High, Amber is Medium and Red is Low.

FUEL GAUGE

Fuel Gauge Function
3 seconds after pressing the Function Button it becomes the fuel
gauge. The colour of the button now indicates the approximate
percentage of battery power left.
When the battery has only 5% charge remaining in whichever
mode, the light will automatically switch to the low/flash setting
and the function button will flash red.

SOS

To activate the SOS flashing mode turn on the light, press and hold the Function Button for 3
seconds until the front LED turns on. To return to the low mode, press the Function Button once.
To turn off the light, press and hold the Function Button for one second until the light goes out then
release the Function Button.
USER GUIDE
VERSO Mk2
Function Button
Fuel Gauge
LED COLOUR BATTERY %
GREEN
AMBER
RED
RED FLASH
100 - 50
50 - 25
25 - 5
5 - EMPTY