Advertisement
Advertisement
Table of Contents
Related Manuals for DeLonghi Fivy
Summary of Contents for DeLonghi Fivy
- Page 1 INSTRUCTIONS ELECTRIC RADIATOR...
- Page 2 Fig. / Abb. 1 Fig. / Abb. 2 Dispositif de commande Zone 3 Zone 2 Zone 3 Zone 2 Dispositivo de mando Zone 1 Dispositivo de comando Control device Dispositivo di comando Bedienblende Fig. / Abb. 3 Fig. / Abb. 4 Fig.
-
Page 3: Operation
4.1 OPERATION LOWER LED All functions of the appliance are controlled by an infrared The heating element is on. remote control. The heating element is off. If the remote control cannot be used (flat batteries or mal- function), the radiator can be turned on and off using the Flashing red Transmission of the signal from the ”Standby”... -
Page 4: Remote Control
Inserting or replacing the batteries: Characteristics: – Remove the cover on the back of the remote control. – Insert two “AAA“ LR03 1.5 V alkaline batteries in the Size 100 x 42 x 20,5 mm correct position. Power supply “AAA“ LR03 1.5 V alkaline –... -
Page 5: Operating Modes
TURNING ON FOR THE FIRST TIME COMFORT The “Comfort“ temperature corresponds to the tem- After inserting the batteries, set the day of the week and time. perature desired by the user. All “Pilot Wire“ commands are disabled. Adjust the day of the week by using the “+“ and “-“... - Page 6 The temperature displayed is always the “Comfort“ tempera- This operating mode is recommended when no people is in ture, regardless of the currently selected “Pilot Wire” mode. the room for more than 1 day. If the Pilot Wire programmer is not connected, “Comfort” operating mode is selected automatically.
-
Page 7: Setting The Current Day And Time
PROGRAM P4 - CUSTOM 4.5 FUNCTIONS With the “P4” program, you can set different temperatures (”Comfort” and ”Night”) over a 24 hour period for each day The appliance has a number of special functions to customise of the week. and optimise use. SETTING THE CURRENT DAY AND TIME 4.5.1 OVERDRIVE (2h) Before setting the custom programme, make... -
Page 8: Fan Heater
IMPORTANT: 4.5.5 FAN HEATER When this function is active, the appliance heats at reduced power and therefore the room takes longer to warm up. The “Fan Heater“ function is only available on the radiators equipped with fan heater. It is not available on this product. Even when this function active, children should still be If the “Fan Heater“... -
Page 9: Maintenance
5. CLEANING 6. MAINTENANCE Before cleaning, make sure the appliance is turned Should any technical problems arise, contact a off, cold and disconnected from the household qualified professional (recognised or authorised by mains. the dealer or manufacturer) or your local dealer. To clean, just wipe with a soft damp cloth and All operations on the appliance must be carried out neutral detergent. - Page 10 8. GUARANTEE 9. DISPOSAL You are recommended to keep all parts of the Make sure the power cable is disconnected from packaging in case the appliance needs to be the power line before performing any operation. returned to the dealer. The appliance must arrive To remove the appliance, follow the procedure for complete and undamaged in order to maintain the fixing to the wall in reverse (Scheme 1).
Need help?
Do you have a question about the Fivy and is the answer not in the manual?
Questions and answers