LEGRAND Watt Stopper DT-305 Quick Start Manual

THIS UNIT IS PRE-SET FOR BASIC
OPERATION AS DESCRIBED IN THIS
GUIDE. ADJUSTMENT IS OPTIONAL.
For full operational details, adjustment and
more features of the product, see the Installation
www.wattstopper.com
Instructions at
Installation shall be in accordance with all
applicable regulations, and codes
SENSOR PLACEMENT (10' MAX. HEIGHT)
Sensor

MOUNTING

Through ceiling tile:

CONNECTING WIRES

• Care should be taken to separate high voltage power from low voltage (Class 2) control wiring.
• All connections to sensor are low voltage, Class 2.
Line
Neutral
Power Pack
Low Voltage
Class 2
Black
Common
Blue
Red
Control Out
+24V
Ceiling
Depluggable
Terminal
Spring Clips (2)
Rear Housing
Front Cover
DT-305
Standard wiring with local off switch
.
30'
28'
Do NOT mount a ceiling sensor above a suspended
fixture. Use a ceiling/wall mount sensor mounted to
the wall below the plane of the bottom of the fixture.
Ceiling
Depluggable terminal
Spring clips (2)
Rear
housing
Front
cover
Feed Through
Load #1
Load #2
(Optional)
Line
Voltage
#1 #2
Line Voltage
Switches
TURN POWER OFF AT CIRCUIT BREAKER
BEFORE INSTALLING POWER PACKS.
Pendant fixtures
Sensor
To octagon box:
Line Voltage
Wire Color Legend
Red
Line
Black
Neutral
White
Power Pack
Low Voltage
Class 2
Red
+24V
Black
Common
Ceiling
Depluggable
Terminal
Spring Clips (2)
Rear Housing
Front Cover
Manual-On wiring with low voltage momentary switch
DT-305
360º Dual Technology Low
Voltage Occupancy Sensor
Ceiling Mount
WARNING
Hot air supply
Sensor
6'
Mount sensor at least 6' away from hot air supply
4" Octagonal J-Box
(at least 1.5" deep)
Ceiling
Depluggable
terminal
Rear
housing
Screws
Front
cover
Feed Through
Line Voltage
Blue
Control Out
Man.Switch
LVS-1
For low voltage
momentary switch set
DT-305 DIP switches:
1 = Off
2 = On
DT-305
3 = On
Load
Common
Man.Switch
Jumper
Back
of
LVS-1