Page 1
Hobby Grade Four Wheel Drive Ball Bearings Splash-resistent Metal Diff. FUN-AFFORDABLE If you do not use it for any extended period of time (e.g. during storage), disconnect and remove the rechargeable batteries inserted in the vehicle to prevent damage from leaking rechargeable batteries. To prolong battery life ,do not allow the vehicle to be used to a standstill resulting in the battery being completely over-discharged.
Page 3
1) Steering Wheel 2) Trigger 3) Steering Trim 4) Throttle Trim 5) Steering Reverse Switch 6) Power Indicator 7) Power ON/OFF 8) AUX. Button (This button is disabled for the car) Steering Wheel: It proportionally operate the right and left steering control of the model. Battery Case: It requires 2pcs of AA size batteries.
Page 4
Ensure reliable steering performance. 1)Place the steering wheel at Center to enable the vehicle to run straightly in line. (NOTE: Flipping to trim the steering wheel is occasionally needed. It largely depends on the conditions of the terrains on which the vehicle runs. 2)Turn the steering wheel to the left, and the car turns left.
Page 5
It enables you to switch the direction of the steering servo's travel. One way is Normal position, and the other is Reverse position. Please refer to the photos below: Normal Position Reverse Position ADJUSTING FRONT STEERING TOE ANGLE Your vehicle can be customized to enhance performance. Simple adjustment and easily maintaining setting will assure optimum operation and performance.
Page 6
Open the battery compartment and remove the batteries from the car. Use Only the provided charger and charger box to charge the batteries for your car. Connect the charger box with the charger, and load the batteries onto the charger box. Always observe correct polarity (plus/+ and minus/-) .
Page 7
We warmly recommend that you check and maintain the vehicle after use. The items in the list below will facilitate you , and follow the list to do will maintain performance of vehicle. --Disconnect and remove the batteries from the car and the radio controller. --Inspect the vehicle for any obvious damage.
Page 8
12600R 12601R 12602R Only For 3.7V, 1100mAH batteries 12604R 12605R 12611R Diff. Gears(Metal)+Diff. Case+ Shims+Mount Screws 12619A 3.7V,1100mAH Batteries (Li-ion) 2pcs NOTE: THE PART IMAGES MAY VARY FROM THE ACTUAL PARTS.
Page 9
79513 Ball bearing 7.95x13x3.5mm(8P) 12600BT 12633 OPTIONAL OPTIONAL Only For 3.7V, 1500mAH batteries 3.7V,1500mAH Batteries (Li-ion) 2pcs NOTE: THE PART IMAGES MAY VARY FROM THE ACTUAL PARTS.
Page 10
12522 ESC/Receiver Unit 12640 12030 Buggy Body(Survivor XB) RC 390 motor 5-wire Servo (19g) -Yellow 12686 12689 NOTE: THE PART IMAGES MAY VARY FROM THE ACTUAL PARTS.
Page 11
Only For 3.7V, 1100mAH batteries Only For 3.7V, 1100mAH batteries Only For 3.7V, 1100mAH batteries Only For 3.7V, 1100mAH batteries 12641 12642 12643 12644 Only For 3.7V, 1500mAH batteries Only For 3.7V, 1500mAH batteries Only For 3.7V, 1500mAH batteries Only For 3.7V, 1500mAH batteries 12710C 12711C Front CVD Shaft(metal)+...
Page 17
Please completely read and understand the entire manual before using, assembling and/or disassembling your remote controlled car. Thank you for purchasing our product. This product is an authentic remote controlled vehicle (RC vehicle). It is not a toy. Read and understand this instruction manual thoroughly before operating the vehicle. If you are not familiar with RC vehicles, we recommend that seek out RC experts for reliable advice.
Need help?
Do you have a question about the SURVIVOR XB and is the answer not in the manual?
Questions and answers