Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19h
Advertisement
Table of Contents
Summary of Contents for Badland APEX 56504
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Table of Contents Specifications ............2 Maintenance ..............6 Safety ................3 Parts List and Diagram ..........7 Setup .................4 Warranty ..............8 Operation ..............5 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
IMpORTANT SAFETY INFORMATION WARNING! Read all instructions. Failure to follow all instructions may result in fire, serious injury and/or DEATH. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. -
Page 4: Setup
Setup Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Remote Control Setup Wireless Remote Setup 1. For wireless Remote Control operation, insert the 2. -
Page 5: Operation
Operation 1. Release the Clutch Handle, and pull out 6. If the Remote operates the Winch about 10 feet of Wire Rope. Leave the properly, it is ready for use. Wire Rope laying on the ground and stay 7. With the Clutch Handle in the Engaged clear of the Wire Rope and Hook. -
Page 6: Maintenance
Maintenance procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOuS INJuRY FROM ACCIDENTAL OpERATION: Disconnect Receiver from Control Box or Solenoid, unplug the Remote Control Cable and disconnect the Battery Cables before performing any inspection, maintenance, or cleaning procedures. -
Page 7: Parts List And Diagram
parts List and Diagram part Description part Description Left Remote Housing Screw ST2.5 x 2 0 Magnet Receiver Bottom Cover Indicator Circuit Board Gasket Switch Lock Block Remote Circuit Board Silicone Pad Right Remote Housing Receiver Top Cover Splash Guard 3V CR2032 Battery (not shown) Screw ST3 ... -
Page 8: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the APEX 56504 and is the answer not in the manual?
Questions and answers
How do you change the batteries or how are the batteries charged?
The Badland APEX 56504 remote uses two 3V CR2032 batteries. To change the batteries, follow these steps:
1. Open the remote by removing the screws from the housing.
2. Locate and remove the old CR2032 batteries.
3. Insert new CR2032 batteries, ensuring correct polarity.
4. Reassemble the remote by securing the housing with screws.
5. After replacing the batteries, match the remote to the receiver by following the pairing procedure:
- Turn on the remote and press the Receiver Button to activate the red indicator light.
- Immediately press IN or OUT on the rocker switch. If the red light goes out, the pairing was successful.
- If the red light remains on, repeat the process.
The remote uses disposable batteries and does not require charging.
This answer is automatically generated