Other Features; Set Alarm Time; Set Sleep Timer; Adjust Volume - Philips 3000 Series User Manual

6 Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold AL1 or AL2
for more than 2 seconds to set alarm time.
2
Press HR to set hour and MIN to set minute,
then press AL1 or AL2 to confirm.
3
TUN
Press to set alarm type (daily, once,
weekdays, or weekends), then press AL1 or
AL2 to confirm.
4
TUN
Press to set an alarm source (FM,
DAB, or buzzer), then press AL1 or AL2 to
confirm.
5
TUN
Press to set the volume level, then
press AL1 or AL2 to confirm.
Tip
•
The unit exits alarm setting mode when being idle for 15
seconds.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
» If the alarm timer is activated, the alarm
indicator turns on.
» If the alarm timer is deactivated, the alarm
indicator turns off.
» The alarm repeats ringing for the next day.
» To stop the alarm, press the coresponding
AL1 or AL2.
EN
8
Snooze the alarm
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing 9
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select a period
(in minutes).
» The clock radio switches to standby mode
automatically after the preset period.
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF] (off)
appears.

Adjust volume

While listening, press

Adjust display brightness

Press BRIGHTNESS repeatedly to adjust the
display brightness.
• HIGH (High)
• MED (Medium)
• LOW (Low)
VOL to adjust volume.