Table of Contents
Advertisement
b. Install the manual button. Insert the button into the hole,
then put on the washer and the nut.
b.
c. Connect with the hose.
c.
4. Install the sensor controller
4.
a. Install the sensor controller box.
b. Install the spring.
c. Connect the sensor wire.
a.
b.
c.
C. Install and uninstall the Fixture, Valve Battery Box
Assembly
Unscrew the screws on the Fixture, Valve, Battery Box
Assembly and withdraw the clamp. Remove the Fixture,
Valve Battery Box Assembly from the urinal by moving it
rightwards and then downwards. Fix the Fixture, Valve
Battery Box Assembly back to the urinal by doing the above
steps inversely.
C.
1145740-T01-B
Screw
Fixture, Valve,
Battery Box Assy.
-5-
Fig.10
10
Fig.11
11
Spring
Sensor Controller
Sensor Wire
Fig.12
12
Fixture, Valve,
Battery Box Assy.
Clamp
Fig.13
13
Advertisement
Table of Contents
