Summary of Contents for Money Controls Compact Hopper Test Box
Page 1
Issue 2.1 – June 2004 This document is the copyright of Money Controls Ltd and may not be reproduced in part or in total by any means, electronic or otherwise, without the written permission of Money Controls Ltd. Money Controls Ltd does not accept liability for any errors or omissions contained within this document.
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 Introduction The test box has been designed to allow the testing of a Compact Hopper. In order to function, the test box must be supplied with 24V 4A 12V 5A Note:- This is only for use with the PARALLEL Compact Hopper.
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 Overview of test box There is a DC Power Supply input and also a Compact Hopper loom emanating from the rear of the test box – the 4-way female connects to the male 4 pin interface connector on the Compact Hopper and the 2 way cable goes to a DC power supply.
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 Test Box Functions The following are the functions available for this test box. 3.1.1 CONT / PULSE Select mode for paying out coins either continuously (“CONT”) or pulsed (“PULSE”).
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 Testing the Compact Hopper Ensure the power supply is OFF and the “HOPPER / ON” switch is set to “HOPPER”. Once all connections have been made, set the “ CONT / PULSE” and the “FREE / COUNT”...
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 CONT / COUNT Switch on the power supply. The display will show the following:- The left hand side of the display (COUNTER) shows how many coins have been paid out while the right hand side (CURRENT) shows the current being drawn by the hopper.
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 PULSE / FREE Switch on the power supply. The display will show the following:- The left hand side of the display (COUNTER) shows how many coins have been paid out while the right hand side (CURRENT) shows the current being drawn by the hopper.
Compact Hopper Test Box Instructions TSP063doc Issue 2.1 – June 2004 PULSE / COUNT Switch on the power supply. The display will show the following:- The left hand side of the display (COUNTER) shows how many coins have been paid out while the right hand side (CURRENT) shows the current being drawn by the hopper.
Page 11
This manual is intended only to assist the reader in the use of this product and therefore Money Controls shall not be liable for any loss or damage whatsoever arising form the use of any information or particulars in, or any incorrect use of the product.
Need help?
Do you have a question about the Compact Hopper Test Box and is the answer not in the manual?
Questions and answers