Page 1
Elegance Shower Door Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower door. If you have any questions on this shower door installation - please call our technical support specialists Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3 or e-mail our technical support group at support@BathAuthority.com...
Page 2
3 business days or if the product has been installed. Contact your distributor or DreamLine if you have any questions. 2. Please note that you should consult your local building codes on questions on installation compliance standards.
Page 3
Detailed Diagram of Shower Door Components Packing List A Packing List B Packing List A 01 Wall profile for glass door 11 Bottom anti-water strip 02 Glass profile for glass door 12 Wall anchor 12pcs 03 Glass door 13 Bolt M4×16(With washer) 4pcs 04 Glass profile 14 Decorative cover...
Page 4
Spring Pivot axis Core Washer A Spacer 4pcs Washer B Back plate Pivot body Bolt 2pcs After you have checked that all components are there, you are ready to start the installation of your DreamLine™ shower door. Rev. 1 .5...
Page 5
Assemble Steps 1. Locate the Wall profile for glass door (1) and place it vertically against the finished wall. Adjust the profile using a level. Use predrilled holes in the aluminum profile to mark holes for drilling. Now drill holes in the wall and insert the Wall anchor (12) into the hole. See Fig 1 for details.
Page 6
Flat head screws ST4.2×16 (15). Cover screw locations with Decorative covers (14). See Fig 8 for details. 12. Repeat the step 11 for the Glass profile (4) and the Wall profile (5). See Fig 9 for details. 13. Open the glass door. Push the Bottom anti-water strip (11) onto the glass door. Push the other Anti-water strip (10) into the groove of the Glass profile for glass door (2).
Page 7
the hole on the mark. Use the Round head screws ST4.2×25 (27) to attach the Bracket (29) to the tray or the threshold. Cover the screw location with Decorative cover (28). See Fig 17 for details. If you use the custom made threshold from the tiles, you need to use Wall anchor (25).
Page 14
Fig 22 Fig 23 Product Maintenance 1. Tempered glass can be cleaned with nonabrasive bathroom cleaners or any glass cleaner you would use elsewhere in your home. Rinse off any glass cleaner that gets on the aluminum as soon as possible to avoid damage to the anodized surface. Avoid striking the glass with any sharp or hard objects.
Need help?
Do you have a question about the Elegance and is the answer not in the manual?
Questions and answers