Page 1
Now Hear Mpow. Air 2.4G Wireless Gaming Headset The Air 2.4 GHz Wireless Gaming Headset comes with a 50mm Dual Chamber, which satisfies your need for sound. You can move freely, react faster, communicate clearly, and lead your squad to victory. Born for every game fanatic, and engineered for winning.
PRODUCT OVERVIEW A. Headband adjustment slider B. Detachable noise cancellation mic C. Mic mute button D. Microphone port Page 1 of 17...
Page 4
PRODUCT OVERVIEW E. Volume wheel F. Power Button G.Power LED H.USB charge port I. 3.5mm Audio Port J. USB charge cable K.3.5mm headphone cable L.2.4G Wireless adapter M.Wireless status light Page 2 of 17...
HEADSET CHARGING Power LED Charge status Breathing Charging Charging complete It is recommended to fully charge the headset before first use. Page 6 of 17...
HEADSET CONNECTION (PC) Transmitter connection To use the headset wirelessly on your PC: 1. Connect the wireless adapter to a USB port on your PC. 2. Press the power button on the headset for 3 seconds to power on. 3. When the wireless adapter status light is solid and the headset ear cup LED is solid, the headset is connected. Note: If it is your first time using the headset you may need to set the headset as the default input and output device.
Page 11
2.Click on the ‘Recording’ tab, then right-click 1.open the 'Control Panel',click on 'All Control Panel ‘MPOW wireless gaming headset’and select Items',right-click on ‘MPOW wireless gaming headset’ ‘Set as Default Device’ and select ‘Set as Default Device’. Page 9 of 17...
HEADSET CONNECTION (MAC) USB-C Hub (Not included) Transmitter connection To use the headset wirelessly on your MAC: 1. Connect the wireless adapter to a USB port on your MAC. 2. Press the power button on the headset for 3 seconds to power on. 3.
Page 13
2.Click on the ‘Sound’,then go to the next 1.Click on 'System Preference...' step.2.Click on the ‘Sound’,then go to the next step. 3.Click on ‘Output’,right-click on ‘MPOW wireless 4.Click on ‘Input’,right-click on ‘MPOW wireless gaming headset’ and select ‘Set as Default Device’.
HEADSET CONNECTION AND CONFIGURATION (PS /PS SLIM/PS PRO/) Transmitter connection To use the headset wirelessly with PlayStation 4 (PS4) 1. Turn on your PS4 game console 2. Connect the wireless adapter to a USB port on your PS4. 3. Press the power button on the headset for 3 seconds to power on. 4.
Page 15
2.Click on the 'Devices' tab, then go to the next step. 4.Click on ‘Input Device’and‘Output Device’, right-click on 3.Click on the 'Audio Devices' tab, then go ‘MPOW wireless gaming headset’ and select ‘Set as Default to the next step. Device’, adjust the 'volume control (headphones)' .
HEADSET CONNECTION(NINTENDO) connection To use the headset wirelessly with Nintendo Switch 1. Turn on your Nintendo Switch Then plug the Switch into the docking station and connect the monitor. 2. Connect the wireless adapter to a USB port on your Nintendo docking station . 3.
HEADSET CONNECTION (WIRED) Headset connection (wired) The headset can be used as a wired headphone with the included 3.5mm audio cable. To use the headset in wired headphone mode: 1. Connect the 3.5mm headphone cable to the headphone port on the headset 2.
TROUBLESHOOTING TIPS No sound/low sound Possible cause Solution Press the Volume Up button on the Ear Force Headset Audio Volume control turned down Controller If necessary, press the Game button of the Chat/Game Mix. Loose connector Confirm that each plug is inserted firmly and fully Close the active App and re-open it.
TECHNICAL SPECIFICATIONS Speaker Sensitvity MIC Sensitvity Standby Time 99±3dB -38±3dB 200H+ Charging Time Battery Capacity Playing Time 1100mAh 3~4H Charging Input Connectivity Frequency 1000mA 2.4GHz Wireless 20-20kHz 3.5mm Audio Cable Page 17 of 17...
Need help?
Do you have a question about the BH415AR and is the answer not in the manual?
Questions and answers