Page 1
Aubrey - 4ft6 Bed 549/6516 Assembly Instructions - Please keep for future reference 549/9441 709/6055 Dimensions - 200,5cm Length Width - 152,1cm Height - 110cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, ca l l t h e customer Helpline: 03456 400 800 Issue 06 - 04/04/17...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly . Check you have all the Assemble on a soft level We do not components and tools listed on surface to avoid damaging the recommend the pages 2 and 3.
Page 3
Components - Panels Please check you have all the panels listed below 04 Central Support 01 Headboard (191 x 6cm) (152,1 x 110,0cm) 02 Footboard 05 Support Foot x 2 (27,8 x 6cm) (152,1 x 60,0cm) 03 Side rails x 2 06 Slats x 26 (190 x 11,5cm) (68 x 6,9cm)
Page 4
Components- Fittings If you have damaged or missing components, call theCustomer Helpline: 03456 400 800 Please check you have all the fittings listed below Note:The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. 90mm Bolt 1/4 x 04 Half-Moon Nut 1/4 x 04 Allen key x 01...
Page 5
Assembly Instructions Step1 Fitting dowels Insert dowels into the indicated parts. Step 2 Assembling side rails Screw headless bolt to footboard as shown. Do not over tighten. B: Insert washer side rails and fit footboard to side rails. Fix headless bolts using nuts and spanner...
Page 6
Assembly Instructions Step 3 Attach side rails the headboard. Insert half moon nut into side rails as shown. Then fix them to the headboard using bolts and allen key . Step 4 Fixing support foot Fix Support foot Central support using Bolt and Allen as shown.
Page 7
Assembly Instructions Step 5 Fixing L shaped brack Fix L shaped brackets into pre-drilled holes in the headboard footboard using screws as shown. Do not over tighten screws. Step 6 Fixing central supp Fix central support to L shaped brackets in headboard footboard using bolts...
Page 8
Assembly Instructions Step 7 Fixing slats Using spacer centralize slats in bed frame prior to fixing. Fix slats using screws , as shown. Fix slats in one side first, then fix them in the other side by pushing the rail against the slats if necessary.
Need help?
Do you have a question about the Aubrey 549/6516 and is the answer not in the manual?
Questions and answers