Table of Contents
Advertisement
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check the hook switch to make sure it pops up.
Won't dial out
• Make sure the tone/pulse setting is programmed correctly.
Phone doesn't ring
• Check the ringer volume.
• Could have too many phones on one line.
(See FCC registration information regarding REN)
Low handset or speaker volume
• Check the volume settings.
Can't be heard by other party
• Make sure the phone cord is securely plugged in.
• Make sure the MUTE function is OFF.
Memory dialing
• Make sure you entered the numbers correctly. (See "Memory.")
Answerer Solutions
Doesn't answer or answers on 10th ring
• Make sure the answerer is turned on.
• Memory is full, erase some messages.
• Check the AC power and phone line connections.
Incoming messages are incomplete
• Was an extension phone picked up?
• The caller left a message that is longer than the message length you set during
setup.
• Memory is full.
37
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 1380 and is the answer not in the manual?
Questions and answers
How to retrieve a message
To retrieve a message on the Uniden 1380, use the remote access commands:
1. Press 2 to listen to messages.
2. Press 1 to re-listen to a message during playback.
3. Press 3 to skip to the next message.
4. Press 0 to delete a message during playback.
5. Press 2 again to stop playback.
This answer is automatically generated