Example Of A Hardware Configuration; Parameterizing The Object Characteristics - Siemens MOBY FC 56 Technical Description

Commissioning Guidelines
Figure 8-2 Example of a hardware configuration
If the project is loaded to the hardware in this state (i.e., without user program), the
SIMATIC CPU and PROFIBUS must assume the RUN state. If they don't, continue
with PROFIBUS trouble-shooting (check the PROFIBUS address settings on the
ASM against the configuration in HW Config).
3rd step: Set characteristics of the ASM
With the object characteristics of the module, only the filehandler (MOBY I or U)
must be on. The object characteristics show one of the following screens.
Drop-down menus indicate possible options.
ASM 473, 475 object characteristics
Figure 8-3 Parameterizing the object characteristics
8-2
ASM 452 object characteristics stored
in the GSD file
FC 56
J31069-D0155-U001-A0-7618