Related Manuals for HealthCare International eTrainer AP
Summary of Contents for HealthCare International eTrainer AP
- Page 1 Active + Passive OWNER’S MANUAL V1 HealthCare International, Inc. PO Box 1509, Langley, WA 98260 www.HCIFitness.com 360.321.7090...
-
Page 3: Table Of Contents
Table of Contents Safety Precautions ..................3 Warranty Information ..................4 Assembly ......................5 Display Console .................... 7 Setup Workout Programs ................8 Active Mode – Resistance Levels 1 -2 ............8 Change Between Active Mode & Passive Mode ........8 Passive Mode –... -
Page 4: Safety Precautions
Safety Precautions This exercise equipment was designed and built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before assembly and operation of this machine. Also, please note the following safety precautions: 1. -
Page 5: Warranty Information
HCI Fitness. We believe that you have purchased one of the highest quality Active and Passive Trainers on the market today. Prior to using your new eTrainer AP please review the owner’s manual and product tips to maximize your workout experience. -
Page 6: Assembly
Assembly Step 1 1. Attach the bottom end of the hydraulic cylinder to the frame of the eTrainer AP unit using the 2 allen key tools. Step 2 + 3 Attach the front support tube to the unit using the screw driver. - Page 7 6. Assembly Complete! You can now plug the eTrainer A/P unit into a power source to begin using your machine. Display QuickStart Guide on Page 8. Operational Tips on Page 9. The eTrainer AP will turn off after 10 minutes of inactivity.
-
Page 8: Display Console
Display Console Arms ON/OFF: Press ON/OFF to Change Turns on and off Between Active and the upper body Passive Mode function Time: Counts Down Workout Time Speed: Motorized Speed Level (1-15) Distance: Workout Distance (1 = 0.1 Miles) Calories: Calories Burt (0.1 = 10 Calories) Power Indicator Plus &... -
Page 9: Setup Workout Programs
4. Use Select Mode to cycle between Time, Speed, Calories & Distance. Hold (R) Reverse for 3 Seconds to Change the Direction of the Peddles. 5. Press ON/OFF to stop exercising. The eTrainer AP will turn off after 10 minutes of inactivity. -
Page 10: Operational Tips
Operational Tips Adjust the Length of the Upper Body Arm To change the length of the upper body arm, unscrew the locking knob and move the upper body arm in our out. When you find the correct position, tighten the knob to lock the upper body arm in place. -
Page 11: Accessories
Accessories Hand Grips – Velcro Hand grips Available– Learn More: 360-321-7090 General Maintenance 1. Cleaning - Use soap and warm water or antibacterial wipes to clean your unit and pedals. 2. Tightening - Periodically inspect your unit to ensure that all screws, nuts, and bolts are tightened and retighten if necessary. - Page 12 Complete Rehabilitation Solutions Contact us for Special Package Pricing! www.hcifitness.com 360-321-7090...
Need help?
Do you have a question about the eTrainer AP and is the answer not in the manual?
Questions and answers