Maintenance - Cannondale SCALPEL Owner's Manual Supplement

Scalpel - Owner's Manual Supplement
The following table lists only supplemental maintenance items.
Please consult your

maintenance.

Item
Cable Routing - Make sure control cables are in place,
undamaged and attached securely.
Frame Protection - Check the various frame protectors
(downtube, headtube, chainstay, swingarm on your bike. Make
sure they are in place and in good condition.
Damage Inspection - Clean and visually inspect entire bike
frame/swing arm/linkage assembly for cracks or damage.
Check Tightening Torques - In addition to other component
specific tightening torques for your bike. tighten according to the
"Tightening Torques" information listed in this supplement.
Disassemble, clean, inspect, re-grease, replace worn or damaged
parts in the following assemblies:
• Shock Link
Fork and Shock- Consult the manufacturer's owner's manual for maintenance requirements.
Any part of a poorly maintained bike can break or malfunction leading to an accident where
you can be killed, severely injured or paralyzed.
Frequent checks are necessary to identify the problems that can lead to an accident.
See "Inspect For Safety" in your
137384
MAINTENANCE
Cannondale Bicycle Owner's Manual
• Pivot Axles
Cannondale Bicycle Owners
for more information on basic bike
• Frame Pivot Bearings
Manual.
30
Frequency
Before first ride
Before and after each ride
Every few rides
In wet, muddy, sandy
conditions every 25 hrs.
In dry, conditions
every 50 hrs.