Dell Inspiron 5400 2n1 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Inspiron 5400 2n1
  6. Service manual

Dell Inspiron 5400 2n1 Service Manual

Hide thumbs Also See for Inspiron 5400 2n1:
Table of Contents

Advertisement

Quick Links

Download this manual
Inspiron 5400 2n1
Service Manual
Regulatory Model: P126G
Regulatory Type: P126G002

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron 5400 2n1

Summary of Contents for Dell Inspiron 5400 2n1

  • Page 1 Inspiron 5400 2n1 Service Manual Regulatory Model: P126G Regulatory Type: P126G002...
  • Page 2 PERINGATAN: PERINGATAN menunjukkan potensi kerusakan harta benda, cedera pribadi, atau kematian © 2020 Dell Inc. atau anak-anak perusahaannya. Seluruh hak cipta dilindungi oleh undang-undang. Dell, EMC, dan merek dagang lainnya adalah merek dagang dari Dell Inc. atau anak-anak perusahaannya. Merek dagang lain dapat merupakan merek dagang dari pemiliknya masing-masing.

  • Page 3: Table Of Contents

    Mengangkut komponen sensitif............................7 Setelah mengerjakan bagian dalam komputer........................7 2 Melepaskan dan memasang komponen................... 9 Alat bantu yang direkomendasikan............................9 Daftar sekrup..................................9 Major components of Inspiron 5400 2n1...........................10 Penutup bawah..................................11 Removing the base cover.............................. 11 Installing the base cover..............................14 Baterai....................................16 Pencegahan baterai lithium-ion............................
  • Page 4 Menjalankan Pemeriksaan Kinerja Sistem Pra-Boot SupportAssist................65 Lampu diagnostik sistem..............................65 Memulihkan sistem operasi..............................66 Menjalankan Flashing BIOS..............................67 Melakukan Flash BIOS (Kunci USB)..........................67 Media rekam cadang dan opsi pemulihan.........................67 Siklus daya WiFi..................................67 Flea power release................................68 6 Mendapatkan bantuan dan menghubungi Dell................69 Contents...

  • Page 5: Bekerja Pada Bagian Dalam Komputer Anda

    PERHATIAN: Anda hanya boleh melakukan pemecahan masalah dan perbaikan sesuai dengan wewenang atau diarahkan oleh tim bantuan teknis Dell. Kerusakan akibat servis yang tidak diizinkan oleh Dell tidak tercakup dalam jaminan. Baca petunjuk keselamatan yang dikirimkan bersama produk tersebut atau lihat di www.dell.com/regulatory_compliance.

  • Page 6: Pelepasan Arus Elektrostatis-Proteksi Esd

    Akibat dari densitas yang ditingkatkan dari semikonduktor yang digunakan dalam produk Dell terkini, sensitivitas terhadap kerusakan statis saat ini lebih tinggi daripada produk-produk Dell sebelumnya. Atas alasan ini, beberapa metode yang telah disetujui sebelumnya tentang penanganan komponen tidak berlaku lagi.

  • Page 7: Mengangkut Komponen Sensitif

    Mengangkut komponen sensitif Saat mengangkut komponen sensitif ESD seperti suku cadang pengganti atau suku cadang yang akan dikembalikan ke Dell, penting untuk menempatkan suku cadang ini dalam tas anti-statis untuk pengangkutan yang aman.
  • Page 8 langkah 1. Pasang kembali semua sekrup dan pastikan tidak ada sekrup yang tertinggal di dalam komputer Anda. 2. Sambungkan semua perangkat eksternal, periferal, atau kabel yang Anda lepaskan sebelum mengerjakan komputer Anda. 3. Pasang kembali semua kartu media, disk, dan komponen lain yang Anda lepaskan sebelum mengerjakan komputer Anda. 4.

  • Page 9: Melepaskan Dan Memasang Komponen

    Melepaskan dan memasang komponen Alat bantu yang direkomendasikan Prosedur dalam dokumen ini memerlukan alat bantu sebagai berikut: • Phillips screwdrivers #0 and #1 • Plastic scribe Daftar sekrup CATATAN: Saat melepaskan sekrup dari komponen, direkomendasikan untuk mencatat jenis sekrup, jumlah sekrup, dan kemudian menempatkannya di kotak penyimpanan sekrup.

  • Page 10: Major Components Of Inspiron 5400 2N1

    Palm-rest and keyboard M2x3 assembly USB Type-C bracket Palm-rest and keyboard M2x3 assembly System board Palm-rest and keyboard M2x2 assembly Major components of Inspiron 5400 2n1 The following image shows the major components of Inspiron 5400 2n1. Melepaskan dan memasang komponen...

  • Page 11: Penutup Bawah

    19. Solid-state drive thermal bracket NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative for purchase options.
  • Page 12 Melepaskan dan memasang komponen...
  • Page 13 Melepaskan dan memasang komponen...

  • Page 14: Installing The Base Cover

    Steps 1. Remove the six screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly. NOTE: Upon loosening the three captive screws, the base cover will pop up creating a gap between the base cover and the palm-rest assembly.
  • Page 15 Melepaskan dan memasang komponen...

  • Page 16: Baterai

    • Jika baterai tertahan di dalam komputer karena pembengkakan, jangan coba melepasnya karena menusuk, membengkokkan, atau menghancurkan baterai litium-ion bisa berbahaya. Dalam keadaan demikian, hubungi dukungan teknis Dell untuk bantuan. Lihat www.dell.com/contactdell. • Selalu beli baterai asli dari www.dell.com atau mitra dan pengecer resmi Dell.

  • Page 17: Installing The Battery

    Steps 1. Peel the tape that secures the battery cable to the system board (applicable only if not peeled earlier). 2. Disconnect the battery cable from the system board (applicable only if not disconnected earlier). 3. Remove the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly. 4.

  • Page 18: Baterai Sel Berbentuk Koin

    Steps 1. Using the alignment posts, place the battery on the palm-rest and keyboard assembly. 2. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly. 3. Connect the battery cable to the system board. 4.

  • Page 19: Installing The Coin-Cell Battery

    Steps 1. Disconnect the coin-cell battery from the I/O board. 2. Remove the coin-cell battery cable from the routing guide on the fan. 3. Using a plastic scribe, peel the coin-cell battery off the slot on the palm-rest and keyboard assembly. Installing the coin-cell battery Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.

  • Page 20: Modul Memori

    Steps 1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly. 2. Lift the speaker cable and route the coin-cell battery cable through the routing guide on the fan. 3. Connect the coin-cell battery cable to the I/O board. Next steps 1.

  • Page 21: Installing The Memory Modules

    Steps 1. Lift the flap to access the memory module. 2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops 3. Slide and remove the memory module from the memory-module slot. NOTE: Repeat step 2 to step 3 to remove any other memory modules installed in your computer.
  • Page 22 Steps 1. Lift the flap to access the memory-module slot. 2. Align the notch on the memory module with the tab on the memory-module slot. 3. Slide the memory module firmly at an angle, into the memory-module slot. 4. Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it.

  • Page 23: Speaker

    Speaker Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image indicates the location of the speakers and provides a visual representation of the removal procedure. Steps 1.

  • Page 24: Unit Pendingin

    Steps 1. Using the alignment posts and rubber grommets, place the speakers on the slots of the palm-rest and keyboard assembly. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Connect the speaker cable to the system board. Next steps 1.

  • Page 25: Installing The Heat Sink

    Steps 1. In reverse sequential order (as indicated on the heat sink), loosen the seven captive screws that secure the heat sink to the system board. 2. Lift the heat sink off the system board. Installing the heat sink Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.

  • Page 26: Port Adaptor Daya

    Steps 1. Align the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board. Next steps 1.

  • Page 27: Installing The Power-Adapter Port

    Steps 1. Remove the three screws (M2.5x5) that secure the right display-hinge to the palm-rest and keyboard assembly. 2. Open the right display-hinge at an angle of 90 degrees. 3. Peel the tape that secures the power-adapter port cable to the system board. 4.

  • Page 28: Panel Sentuh

    Steps 1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly. 2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly. 3. Route the power-adapter port cable through the routing guide on the palm-rest and keyboard assembly. 4.

  • Page 29: Installing The Touchpad

    Steps 1. Remove the three screws (M2x2) that secure the touchpad bracket to the palm-rest and keyboard assembly. 2. Open the latch, and disconnect the touchpad cable from the touchpad. 3. Peel the tape that secures the touchpad to the palm-rest and keyboard assembly. 4.

  • Page 30: Solid-State Drive

    Steps 1. Slide the touchpad into the slot on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x2) that secure the touchpad to the palm-rest and keyboard assembly. 3. Adhere the tape that secures the touchpad to the palm-rest and keyboard assembly. 4.

  • Page 31: Installing The M.2 2230 Solid-State Drive

    Steps 1. Remove the screw (M2x3) that secures the solid-state drive thermal bracket to the palm-rest and keyboard assembly. 2. Lift the solid-state drive thermal bracket off the palm-rest and keyboard assembly. 3. Remove the screw (M2x3) that secures the solid-state drive to the solid-state drive bracket. 4.
  • Page 32 The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure. Melepaskan dan memasang komponen...

  • Page 33: Removing The M.2 2280 Solid-State Drive

    Steps 1. Remove the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly. 2. Turn the solid-state drive bracket at an angle of 180 degrees. 3. Insert the solid-state drive bracket into the other solid-state drive bracket slot on the palm-rest and keyboard assembly. 4.

  • Page 34: Installing The M.2 2280 Solid-State Drive

    Steps 1. Remove the screw (M2x3) that secures the solid-state drive thermal bracket to the palm-rest and keyboard assembly. 2. Lift the solid-state drive thermal bracket off the palm-rest and keyboard assembly. 3. Remove the screw (M2x3) that secures the solid-state drive to the solid-state drive bracket. 4.
  • Page 35 The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the installation procedure. NOTE: Perform step 1 to step 3 if you are replacing the M.2 2230 solid-state drive with an M.2 2280 solid-state drive. Melepaskan dan memasang komponen...

  • Page 36: Kipas

    Steps 1. Remove the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly. 2. Turn the solid-state drive bracket at an angle of 180 degrees. 3. Insert the solid-state drive bracket into the other solid-state drive bracket slot on the palm-rest and keyboard assembly. 4.

  • Page 37: Installing The Fan

    3. Lift the fan off the palm-rest and keyboard assembly. Installing the fan Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the fan and provides a visual representation of the installation procedure. Steps 1.

  • Page 38: Installing The I/O Board

    About this task The following image indicates the location of the I/O-board and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2.5x5) that secure the left display hinge to the palm-rest and keyboard assembly. 2.

  • Page 39: Tombol Daya Dengan Pembaca Sidik Jari

    Steps 1. Slide the I/O board into the slots on the palm-rest and keyboard assembly. 2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 4.

  • Page 40: Installing The Power-Button Board

    About this task The following image indicates the location of the power button with fingerprint reader and provides a visual representation of the removal procedure. Steps 1. Remove the two screws (M2x3) that secure the power-button bracket to the palm-rest and keyboard assembly. 2.

  • Page 41: Unit Display

    Steps 1. Align and place the power button, along with its cable, on the slot of the palm-rest and keyboard assembly. 2. Slide the power-button cable into the connector on the fingerprint reader-board and close the latch to secure the cable. 3.
  • Page 42 Melepaskan dan memasang komponen...
  • Page 43 Steps 1. Peel the tape that secures the display cable to the system board. 2. Open the latch, and disconnect the display cable from the system board. 3. Remove the two screws (M2.5x5) that secure the left-display hinges to the palm-rest and keyboard assembly. 4.

  • Page 44: Installing The Display Assembly

    5. Lift at an angle and slide the display assembly off the palm-rest and keyboard assembly. Installing the display assembly Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the display assembly and provides a visual representation of the installation procedure. Melepaskan dan memasang komponen...
  • Page 45 Steps 1. Slide the display assembly at an angle, and place the display assembly on the palm-rest and keyboard assembly. 2. Replace the two screws (M2.5x5) that secure the left-display hinge to the palm-rest and keyboard assembly. 3. Replace the three screws (M2.5x5) that secure the right-display hinge to the palm-rest and keyboard assembly. 4.

  • Page 46: Board Sistem

    Board sistem Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the coin-cell battery. 5. Remove the memory modules. 6. Remove the M.2 2230 solid-state drive M.2 2280 solid-state drive, as applicable.
  • Page 47 Steps 1. Remove the three screws (M2.5x5) that secure the right-display hinge to the palm-rest and keyboard assembly.. 2. Open the hinge at an angle of 90 degrees. 3. Peel the tape that secures the USB Type-C port bracket to the system board. 4.

  • Page 48: Installing The System Board

    5. Peel the tape that secures the I/O-board cable to the system board. 6. Open the latch, and disconnect the I/O-board cable from the system board. 7. Disconnect the speaker cable from the system board. 8. Open the latch, and disconnect the touchpad cable from the system board. 9.
  • Page 49 Steps 1. Align and place the system board on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly. 3. Connect the display cable to the connector on the system board and close the latch to secure the cable. 4.

  • Page 50: Unit Sandaran Tangan Dan Keyboard

    5. Connect the power-adapter port cable to the connector on the system board. 6. Align the screw holes on the USB Type-C port bracket with the screw holes on the system board. 7. Adhere the tape that secures the USB Type-C port bracket to the system board. 8.

  • Page 51: Installing The Palm-Rest And Keyboard Assembly

    Steps After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly. Installing the palm-rest and keyboard assembly Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the installation procedure.
  • Page 52 Steps Place the palm-rest and keyboard assembly on a clean and flat surface. Next steps 1. Install the system board. 2. Install the display assembly. 3. Install the power-button board. 4. Install the touchpad. 5. Install the power-adapter port. 6. Install the fan. 7.

  • Page 53: Driver Dan Unduhan

    Driver dan Unduhan Saat melakukan pemecahan masalah, mengunduh, atau memasang driver, Anda disarankan untuk membaca artikel Basis Pengetahuan Dell, Pertanyaan Umum Driver dan Unduhan SLN128938. Driver dan Unduhan...

  • Page 54: System Setup (Pengaturan Sistem)

    Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can: •...

  • Page 55: One Time Boot Menu

    Depending on this computer and its installed devices, the items that are listed in this section may or may not be displayed. Table 3. System setup options—System information menu Overview Inspiron 5400 2n1 BIOS Version Displays the BIOS version number. Service Tag Displays the Service Tag of the computer.
  • Page 56 Overview Processor Type Displays the processor type. Maximum Clock Speed Displays the maximum processor clock speed. Minimum Clock Speed Displays the minimum processor clock speed. Current Clock Speed Displays the current processor clock speed. Core Count Displays the number of cores on the processor. Processor ID Displays the processor identification code.
  • Page 57 Boot Configuration Enable UEFI Network Stack Enables or disables UEFI Network Stack. Default: ON UEFI Boot Path Security Enables or disables the system to prompt the user to enter the Admin password when booting a UEFI boot path from the F12 boot menu. Default: Always Except Internal HDD Table 5.
  • Page 58 System Configuration By default, Enable Camera is selected. Touchscreen Enables or disables the touchscreen. By default, Touchscreen is selected. Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device. By default, Enable Fingerprint Reader Device is selected. Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only state.
  • Page 59 Security TPM 2.0 Security On Select whether or not the Trusted Platform Model (TPM) is visible to the OS. Default: ON PPI Bypass for Enable Commands Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user prompts when issuing TPM PPI enabled and activate commands. Default: OFF PPI Bypass for Disable Commands Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI...
  • Page 60 Passwords System Password Min Specify the minimum number of characters allowed for System password. Default: 4 System Password Max Specify the maximum number of characters allowed for System password. Default: 32 Admin Password Sets, Changes, or deletes the administrator (admin) password (sometimes called the "setup"...
  • Page 61 Enables the computer to turn on and go to boot when AC power is supplied to the computer. Default: OFF Wake on Dell USB-C Dock Enables connecting a Dell USB-C Dock to wake the computer from Standby. Default: ON Auto On Time Enables the computer to automatically power on for defined days and times.
  • Page 62 Power Management Lid Switch Power On Lid Open Enables the computer to power up from the off state whenever the lid is opened. Default: ON Table 13. System setup options—Wireless menu Wireless Wireless Device Enable Enable or disable internal WLAN/Bluetooth devices. By default, WLAN is selected.
  • Page 63 POST Behavior Default: ON Early Keyboard Backlight Keyboard Backlight Sign of Life. Default: ON MAC Address Pass-Through Replaces the external NIC MAC address (in a supported dock or dongle) with the selected MAC address from the computer. Default: System Unique MAC Address. Table 15.

  • Page 64: Clearing Cmos Settings

    Sistem tentang tugas ini Untuk menghapus kata sandi sistem atau BIOS, hubungi dukungan teknis Dell seperti yang dijelaskan di www.dell.com/contactdell. CATATAN: Untuk informasi tentang cara mengatur ulang kata sandi Windows atau aplikasi, lihat dokumentasi yang disertakan bersama Windows atau aplikasi Anda.

  • Page 65: Pemecahan Masalah

    Menjalankan Pemeriksaan Kinerja Sistem Pra-Boot SupportAssist langkah 1. Hidupkan komputer Anda. 2. Saat komputer booting, tekan tombol F12 saat logo Dell muncul. 3. Pada layar menu booting, pilih opsi Diagnostics (Diagnostik). 4. Klik anak panah pada pojok kiri bawah. Halaman utama diagnostik ditampilkan.

  • Page 66: Memulihkan Sistem Operasi

    Dell SupportAssist OS Recovery. Dell SupportAssist OS Recovery adalah alat yang berdiri sendiri yang dipasang sebelumnya di semua komputer Dell yang diinstal dengan sistem operasi Windows 10. Dell SupportAssist OS Recovery terdiri dari alat untuk mendiagnosis dan memecahkan masalah yang mungkin terjadi sebelum komputer Anda melakukan booting ke sistem operasi.

  • Page 67: Menjalankan Flashing Bios

    Anda juga dapat mengunduhnya dari situs web Dukungan Dell untuk memecahkan masalah dan memperbaiki komputer Anda jika komputer gagal melakukan booting ke sistem operasi utama mereka karena kegagalan perangkat lunak atau perangkat keras. Untuk informasi lebih lanjut tentang Dell SupportAssist OS Recovery, lihat Panduan Pengguna Dell SupportAssist OS Recovery di www.dell.com/support.

  • Page 68: Flea Power Release

    CATATAN: Beberapa ISP (Penyedia Layanan Internet - Internet Service Providers) menyediakan modem/perangkat kombinasi perute. langkah 1. Matikan komputer Anda. 2. Matikan modem. 3. Matikan router nirkabel. 4. Tunggu selama 30 detik. 5. Nyalakan perute. 6. Nyalakan modem. 7. Hidupkan komputer Anda. Flea power release About this task Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been...

  • Page 69: Mendapatkan Bantuan Dan Menghubungi Dell

    Mendapatkan bantuan dan menghubungi Dell Sumber daya bantuan mandiri Anda bisa mendapatkan informasi dan bantuan tentang produk dan layanan Dell dengan menggunakan sumber daya bantuan mandiri ini: Tabel 21. Sumber daya bantuan mandiri Sumber daya bantuan mandiri Lokasi sumber daya Informasi tentang produk dan layanan Dell.

This manual is also suitable for:

P126g

Table of Contents