Page 3
Misuse may result in electric shock or fire. To prevent your TV from being damaged, apparatus has been exposed to rain or moisture, does not operate normally, or To get the most out of your new VIZIO product, read these instructions before using the following instructions should be observed for the installation, use, and has been dropped.
Page 4
• Do not overload power strips and extension cords. Overloading can result in fire electric shock. When your TV will not be used for an extended period of time, • The American Academy of Pediatrics discourages television viewing for children or electric shock.
Page 5
TELEVISION ANTENNA CONNECTION PROTECTION The TV shall be installed in accordance with the applicable provisions of Article 810 and Article 820. If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Getting to Know Your TV FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on, see Turning the Power Indicator On or Off on page 23.
REAR PANEL Power Press to turn on the TV. Press and hold to turn the TV off. Volume Press to increase or decrease the TV volume level. Input INPUT INPUT Press to access the input menu. Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
Page 9
Connecting a device — AUDIO & VIDEO CABLE TYPES HDMI CABLE COAXIAL CABLE Your TV can be used to display output from most devices. Coaxial HDMI Verify that your device has a video port that matches an available port on the TV (HDMI, Composite, etc.). Connect the appropriate cable (not included) to the TV and the device.
WALL-MOUNTING THE TV First you will need a wall mount. Consult the provided table below to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. To install your TV on a wall: Disconnect any cables connected to your TV.
Mute Turn the audio on or off Cycle through the different picture setting modes TIP: When needed, VIZIO recommends replacing the Long press to enabled/disable talk back feature batteries that came with this remote with two, new Dash Duracell ‘AAA’...
Your use of this device and software functionality are covered by VIZIO and Google ‘s respective Terms of Service and Privacy Policies. By pressing “Accept All”, you agree to be bound by the (i) VIZIO Terms of Service and Privacy Policy and (ii) the Google Terms of Service and Privacy Policy.
Using the On-Screen Menu Your TV features an easy-to-use on-screen menu . NAVIGATING THE ON-SCREEN MENU CHANGING THE INPUT SOURCE To open the on-screen menu, press the MENU button on the remote. External devices, such as DVD players, Blu-ray players, and video game consoles, To open the on-screen menu: can be connected to your TV.
ADJUSTING THE PICTURE SETTINGS To manually change each of the picture settings, use the Up/Down Navigation Adjusting the Color Temperature buttons on the remote to highlight that picture setting, then use the Left/Right Your TV can be adjusted to suit your preferences and viewing conditions. Adjusting the color temperature changes the white balance of the picture.
Changing the Picture Aspect Ratio Some programs have black bars on the top or sides of the screen so that the Adjusting Advanced Picture Settings picture keeps its original shape. Examples include widescreen movies and older TV To adjust advanced picture settings: To change the screen aspect ratio: programs.
Page 16
Adjusting the Color Tuner Settings To adjust the color management system/20 point white balance To show or hide the SMPTE Test Pattern: settings: Menu > Picture > Advanced Picture > Color Calibration > Color The Color Tuner settings allow you to adjust the color management system, 20 point Tuner >...
Page 17
To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: To show or hide the Uniformity Analyzer Test Pattern: Menu > Picture > Advanced Picture > Color Calibration > Color Menu > Picture > Advanced Picture >...
Adjusting Picture Input Settings Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Enable HDMI Mode, Full Color 4:4:4, Filmmaker Mode and adjust picture size and Manage custom picture modes and reset preset picture modes. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
Page 19
Copy a Picture Mode Lock a Picture Mode Deleting a Picture Mode Custom picture mode settings can be copied to be applied to other inputs. Custom picture modes can be locked/unlocked with a unique PIN to prevent Custom picture modes that are no longer needed can be deleted. accidental changes to their settings.
ADJUSTING THE AUDIO SETTINGS • Analog Audio Out — Select Variable if you are controlling the volume with the remote. Select Fixed if an external audio device (sound bar or AV receiver) will control the volume. To adjust the audio settings: Dialogue Enhancer —...
Changing the Manual Setup Settings ADJUSTING THE NETWORK SETTINGS Connecting to a Hidden Network Advanced users can fine-tune the network settings using the Manual Setup feature. Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed To connect to a wireless network whose network name (SSID) is not being broadcast: The security settings on your router may require you to enter the TV's MAC address.
SETTING UP TV CHANNELS Scanning for TV Channels Skipping Channels You can use the TV’s Channels menu to: The TV may need to scan for channels before it can display programs and their After a channel scan is completed, you may find that some channels are too weak to TV Channels associated information.
Changing the Analog Audio Language To use the Digital Language feature: Menu > TV Channels > Digital Audio Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an Select the preferred audio language.
Using Parental Controls Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating The TV’s parental controls allow you to prevent the TV from displaying certain To manage program content according to its rating, you must first enable the A channel may sometimes broadcast programs that are meant for a variety of Program Rating feature.
Setting Up Closed Captioning Changing the Appearance of Digital Closed Captions VIZIO is committed to providing intuitive, user-friendly products. Your new VIZIO TV Your TV can display closed captions for programs that include them. Closed captions Digital closed captions can be displayed according to your preference. See the offers several accessibility features that can help you with easy navigation.
Page 26
Use the Up/Down Navigation buttons on the remote to highlight the setting Typical choices include: you wish to change, then use the Left/Right Navigation buttons to change the Opaque background, transparent window — Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As •...
CHANGING THE SYSTEM SETTINGS Changing the On-Screen Menu Language Setting the Time Using the System menu, you can: Your TV can display the on-screen menu in different languages. To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone: System •...
Changing the TV Name Renaming Devices on the Input Menu Adjusting the Power Mode Naming your TV helps differentiate it from other cast devices you may have You can rename the inputs to make them easier to recognize on the Input menu. For Your TV is set to Eco Mode by default.
Using the USB Power Feature Turning the Power Indicator On or Off Setting the Auto Power Off Feature USB Power The USB port can be used to charge devices. The power indicator on the front of your TV normally does not glow when the TV is To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal.
CEC Audio Setup Connect your audio device to the HDMI-1 (HDMI ARC) input on the TV. On your audio device, select the HDMI ARC input. Using CEC, your VIZIO TV remote can control such features including (depending on specific device): •...
VIZIO Privacy Policy If an update is found, the TV will ask to confirm the update. If no update is found, the • View the VIZIO Privacy Policy Store Demo To restore the TV to its factory default settings: screen will note The TV is up-to-date.
Viewing Data WHAT DO WE DO WITH VIEWING DATA? Managing Advertising Settings VIZIO or its authorized data partners may combine Viewing Data with household To turn viewing data on or off: Your advertising choices can be personalized. demographic data, or other data about your digital actions, like smartphone location, Menu >...
USING THE INFO WINDOW Press the INFO button to display: • TV name • Current input or for tuner: current channel Current input or • Picture aspect for tuner: current channel Picture Aspect Audio Type Network Name • Audio type •...
SmartCast Home lets you discover, stream, and control your content like never • Stream high quality entertainment. Download the VIZIO SmartCast Mobile app and turn your smartphone into a remote before! Access top apps, like Netflix, Hulu, and Amazon Prime Video, by using to control and configure your TV.
What is WatchFree? What you can do with WatchFree How to Launch WatchFree VIZIO WatchFree takes your cord-cutting entertainment experience one step further! • Stream over 100 live TV channels absolutely free – news, movies, sports, To launch and begin watching entertainment offered on WatchFree: comedy, music and more.
Playing USB Media The USB Media Player allows you to connect a USB flash drive to your TV and play Preparing Your USB Drive to Play USB Media Removing the USB Drive from the TV music, video, or photos. To display USB media, you must first save your videos onto a USB flash drive: To safely remove your USB flash drive from the TV: •...
Page 37
Playing USB Media: Music Progress Bar Album Art Back Button Displays the duration of the currently- If included on the USB thumb drive and Now Playing Information Highlight this button and press OK to Displays song title, album title, and playing song.
Page 38
Playing USB Media: Video Back Button Highlight this button and press OK to return to the previous screen. Video Connected Sources USB1: MyFlashDrive Displays connected USB devices. MyFlashDrive\Video\root\My Videos File Date Duration Family Vacation - California 00:23:43 Current Folder 28th Birthday Party 00:38:18 Korea 2019 00:41:08...
Page 39
Playing USB Media: Photo Back Button Back Button Highlight this button and press OK to Highlight and press OK to return return to the previous screen. to left column. Current Folder Displays the folder path. Photo VIZIO_2GB\Photo\root Connected Sources USB1: MyFlashDrive Displays connected USB devices.
Offers Enhancements Get efficient, accurate assistance Stay up-to-date with product Be first to know about important from the VIZIO Support team. news and take advantage of product updates. and alerts. exclusive offers. Do you have questions? Find answers at...
Press INPUT button on the remote control to select a different input source. technology. However, sometimes pixels may not display correctly. These types How do I stream apps like Netflix to my VIZIO SmartCast® TV? of occurrences are inherent to this type of product and do not constitute a •...
Page 42
• Open the VIZIO SmartCast Mobile app on your phone or tablet. Tap on the Menu • If you are using an antenna, the signal strength of the channel may be low.
Specifications V405-H9 V405-H19 V505-H9 V505-H19 V605-H3 V655-H4 Size 40" 40" 50" 50" 60" 65" Viewable Area 39.5" 39.5" 49.5" 49.5" 59.5" 64.5" PRODUCT DIMENSIONS 35.51" x 22.70" x 8.36" 35.51" x 22.70" x 8.36" 44.13" x 28.00" x 10.07" 44.13" x 28.00" x 10.07" 53.5"...
Page 44
V655-H9 V655-H19 V705-H3 V705-H13 Size 65" 65" 70" 70" Viewable Area 64.5" 64.5" 69.5" 69.5" PRODUCT DIMENSIONS 57.37" x 35.61" x 11.95" 57.37" x 35.61" x 11.95" 61.8" x 38.4" x 12.9" 61.8" x 38.4" x 12.9" Dimensions w/ Stand (1457.2 x 904.6 x 303.5 mm) (1457.2 x 904.6 x 303.5 mm) (1569.2 x 976.4 x 329.3 mm)
Regulatory Information FCC Class B Radio Interference Statement Notice Canada Notice for License-Exempt Radio Apparatus This device complies with Part 15 of the FCC Rules. Operation is subject to the The changes or modifications not expressly approved by the party responsible for This device complies with Industry Canada’s license-exempt RSSs.
This warranty contains a binding arbitration agreement and a class action the issue informally and wish to file a formal claim against VIZIO, and if you are a show that the product is within the warranty period. When you return a product waiver for United States residents.
Page 47
Arbitration Act, and may be entered in any court having jurisdiction. Except as PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL may be required by law, neither you nor VIZIO nor an arbitrator may disclose the OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION existence, content, or results of any arbitration under this warranty without the MAY NOT APPLY TO YOU.
Always properly dispose of your VIZIO products in accordance For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, use of this product is subject to VIZIO’s privacy policy, which may be updated from with local laws and regulations. VIZIO supports the proper recycling of our Inc.
Need help?
Do you have a question about the V Series and is the answer not in the manual?
Questions and answers
How to power on/off Vizio V435-H1 model without remote
To power on or off the Vizio V435-H1 model without a remote, press the power button located on the back of the TV.
This answer is automatically generated
is there a way to watch and have an audio output for headphones?