1. Manuals
  2. Brands
  3. Coram Showers Manuals
  4. Shower Cabins
  5. OPTIMA PIVOT DOOR
  6. Instructions

Coram Showers OPTIMA PIVOT DOOR Instructions

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

OPTIMA PIVOT DOOR
Please read these instructions carefully and keep for future reference.

SAFETY

● Handle glass with great care. Although the glass is very tough, sharp impacts can damage both the
glass and metal frame.
● Make sure there are no hidden pipes or cables hidden in the wall where you intend to drill.
● Wear safety goggles, shoes and appropriate clothing.

BEFORE INSTALLATION

● Check that the shower tray is level in all directions. The enclosure will not sit correctly on an uneven surface.
If uneven, the wall channels may not fit and the doors may not shut correctly.
● The enclosure should be fitted on tiled walls which are sealed with waterproof grout.
● There must be a good silicone seal between the rim of the shower tray and the wall.
● The shower tray and the enclosure must match in size. Attempting to fit the incorrect size of enclosure to
the shower tray will result in water leaks.
● Always check very carefully that components are vertical.
● To avoid damage, use the opened out packaging to build the enclosure on.
Equipment needed:
Drill, 6.5mm Masonry Bit, 4.5mm & 3mm Metal Bits (general), Crosshead Screwdriver, Spirit Level, Pencil, Tape Measure,
Masking Tape, Silicone Sealant.
Note: The screws and wall plugs supplied are for masonry walls. For lightweight walls i.e. stud partition, plasterboard etc,
use the correct type of fixings.
CUSTOMER CARELINE 01746 713410
Incorrect fitting will invalidate the guarantee.
00 71443 00 / Issue 3 / 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPTIMA PIVOT DOOR and is the answer not in the manual?

Questions and answers

Related Manuals for Coram Showers OPTIMA PIVOT DOOR

Summary of Contents for Coram Showers OPTIMA PIVOT DOOR

  • Page 1 00 71443 00 / Issue 3 / 12 OPTIMA PIVOT DOOR Please read these instructions carefully and keep for future reference. Incorrect fitting will invalidate the guarantee. SAFETY ● Handle glass with great care. Although the glass is very tough, sharp impacts can damage both the glass and metal frame.
  • Page 2 Check contents of pack before installation. If anything is missing, contact our Customer Careline for assistance. PN10801 CUSTOMER CARELINE: 01746 713410 PN3230 PN4748 PN3225 PN80519 32mm 700 = PN40222 PN3222 760 = PN40223 800 = PN40224 900 = PN40225 PN10801 10mm 100mm ø...
  • Page 3 ø 6.5 X = Door widths - 700 Door = 650 - 700mm 760 Door = 710 - 760mm 800 Door = 750 - 800mm 900 Door = 850 - 900mm ● ● ● a: Place wall channels on the tray ensuring they are vertical and a minimum of 3mm back from the front of the tray. Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping.
  • Page 4 Please note: There has been a glass coating applied to this product, use a squeegee to remove water and debris. Periodically check all fixings and tighten if necessary. CORAM SHOWERS LTD Stanmore Industrial Estate, Bridgnorth, Shropshire WV15 5HP, UK • Tel: 01746 766466 • Fax: 01746 764140 • www.coram.co.uk...

Table of Contents