Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems Xtensions 9 S-Shape
Summary of Contents for Pro-Ject Audio Systems Xtensions 9 S-Shape
- Page 1 INSTRUCTIONS FOR USE Pro-Ject tension 9 S-Shape...
- Page 2 © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20...
-
Page 3: Controls, Features And Connections
Counterweight no. 180 for cartridges with weight between 3 - 9g Counterweight no. 181 for cartridges with weight between 7 - 16g Centering ring Signal cable Pro-Ject Connect IT 5P-CC with L-Shape connector 1,23m Universal power supply © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... -
Page 4: Safety Instructions
Dear music lover, Thank you for purchasing a Pro-Ject Audio Systems record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse... -
Page 5: Fitting And Connecting The Cartridge
Rotate the counterweight counter clockwise (seen from the front) to adjust the downforce according to the cartridge manufacturer's recommendations. One mark on the scale represents 1 mN (= 0,1g / 0,1 Pond) of downforce. © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... -
Page 6: Anti-Skating Force Adjustment
Put the anti-skating sliding mechanism on the end of the anti-skating support rod. The anti-skating thread should fit into the groove in the tonearm. Be careful when handing the anti-skating thread in order to avoid damaging it. © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... - Page 7 Lower than 13 mN or 1.3 grams 1st groove from bearing 13–18 mN or 1.3–1.8 grams 2ndgroove from bearing 18–25 mN or 1.8–2.5 grams 3rd groove from bearing © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20...
-
Page 8: Connection To The Amplifier
Carefully retighten the allen screws without applying excessive force (which would deform the arm pillar) – finger tight is quite sufficient. Connection to the amplifier © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... - Page 9 The base and the record player should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay. Technical specifications © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20...
-
Page 10: Maintenance And Cleaning
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching. Always disconnect the record player from the mains power supply as a precaution before maintenance! © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... -
Page 11: Warranty
This guide was produced by: Pro-Ject Audio without prior notice as deemed necessary to © Systems Copyright 2017. All rights reserved. uphold ongoing process technical development. © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20... - Page 12 © Pro-Ject Audio Systems · Pro-Ject tension 9 S-Shape · Revision 2017.12.20...
Need help?
Do you have a question about the Xtensions 9 S-Shape and is the answer not in the manual?
Questions and answers