Table of Contents
Advertisement
Blind Scan
1. Press
MENU
button on the remote to display the main menu.
2. Go to the first line(DVB-S2X Installation) and move to right
button, the "Blind Scan" menu will be displayed.
3. Using the
button on the remote to select satellite.
▲/▼
4. press the
button on the remote, move the focus to "Search", press
▶
to start search.
Manual Scan
1. Press
MENU
button on the remote to display the main menu.
2. Go to the first line(DVB-S2X Installation) and move to right
button, the "Manual Scan" menu will be displayed.
-
Satellite:
Select any satellite by pressing
-
Frequency:
Select frequency by pressing
Symbol Rate:
Displays the current symbol rate of the selected transponder.
-
Polarity:
Display the current polarization H/V of the selected transponder.
-
Scan Type:
Select search type (ALL, TV, FTA).
-
Network Search:
Select Network Search On/Off.
-
3. Search: Press
Red (
4.
Add
TP: Press
GREEN
5.
Delete
TP: Press
YELLOW
6.
Dish
Setting: Press
BLUE
7.
Edit TP:
Press
INFO
button on the remote to edit TP.
◀/▶/
◀/▶/
)button on the remote to start search.
(
)button on the remote to add TP.
(
)button on the remote to delete TP.
(
)button on the remote, step into the "Dish Setting" menu.
select "Blind Scan" and press
，
select "Manual Scan" and press
，
OK
buttons on the remote.
OK
buttons on the remote.
10
OK
OK
button on the remote
OK
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SRT 497S and is the answer not in the manual?
Questions and answers
How to use it
To use the Strong SRT 497S, follow these steps:
1. Setup the Hardware
- Connect the decoder to your TV using an HDMI or AV cable.
- Attach the dish and LNB, ensuring proper alignment.
- Plug in the power adapter and turn on the device.
2. Initial Configuration
- Follow on-screen instructions to set up language, time, and network connections.
- Use the auto or manual channel search function to scan for available satellite channels.
3. Using the Features
- Insert a USB storage device to enable recording and time-shift functions.
- Connect a Wi-Fi adapter or 3G modem to access network features.
- Navigate channels using the remote control.
4. Troubleshooting
- If there is no signal, check cable connections and dish alignment.
- If the remote isn't working, replace the batteries.
- Ensure the TV is set to the correct input source.
5. Safety Guidelines
- Do not touch the power cord with wet hands.
- Keep the unit in a well-ventilated area.
- Unplug the device if not in use for a long time.
For any issues, consult the user manual or contact a local service center.
This answer is automatically generated