Tables Of Setup Menu Operations - Yaesu FTM-300DR Advance Manual

Tables of Setup Menu Operations

Menu Number / Item
DISPLAY
1 TARGET LOCATION
2 COMPASS
3 BAND SCOPE
4 LCD BRIGHTNESS
5 SOFTWARE
VERSION
6 DISPLAY MODE
TX/RX
1 MODE
1 FM BANDWIDTH
2 RX MODE
2 DIGITAL
1 AMS TX MODE
2 DIGITAL POPUP
3 LOCATION
SERVICE
4 STANDBY BEEP
5 DIGITAL VW
3 AUDIO
1 SUB BAND MUTE
2 MIC GAIN
3 VOX
4 RECORDING
MEMORY
1 MEMORY LIST
Description
Switch between the compass screen
and the latitude/longitude display
screen when using the GPS and GM
functions
Set the compass display of the smart
navigation function
Scope Display width setting
Display and key button brightness
Display the software version
Back Track, Altitude, Timer/Clock or
GPS Information screen display.
Set the FM transmit modulation level WIDE / NARROW
Select the receive mode
Set the AMS transmission mode
Information screen popup time
Own (MY) position display setting in
the digital mode
Standby Beep setting
Turn the VW mode selection ON or
OFF
Sub-band mute setting
Microphone sensitivity setting
VOX function settings
Voice record function settings
Display a list of memory channels in
memory mode
(Options in bold are the default settings)
COMPASS / NUMERIC
HEADING UP / NORTH UP
WIDE / NARROW
MIN / MID / MAX
Main / Sub / DSP
BACKTRACK / ALTITUDE/
TIMER/CLOCK / GPS INFORMATION
AUTO / FM / AM
AUTO / TX FM FIXED / TX DN FIXED
OFF / 2 sec / 4 sec / 6 sec / 8 sec /
10 sec / 20 sec / 30 sec / 60 sec /
CONTINUE
ON / OFF
Refer to the separate Operating
Manual GM Edition for details on the
functions.
ON / OFF
OFF / ON
OFF / ON
MIN / LOW / NORMAL / HIGH / MAX
VOX: OFF / LOW / HIGH
DELAY: 0.5s / 1.0s / 1.5s / 2.0s / 2.5s
/ 3.0s
BAND: A / B / A+B
MIC: ON / OFF
OFF / ON
38
Selectable options