SOMFY LT50 Settings Manual
Wired motors
Hide thumbs
Also See for LT50:
- Manual (16 pages) ,
- Installation instructions (2 pages) ,
- Quick start manual (2 pages)
Advertisement
Somfy LT50/LT60 Wired
Motors
Limit Settings
1.
When you first install your motor or roll shutter, you must assume that the motor limits are not
set. This will prevent damage to the roll shutter or motor.
2.
Using a test kit or wall switch, connect power to a single motor.
3.
Remove the motor limit plug cap and press both limit buttons so they in the lowered position.
Advertisement
Table of Contents
Related Manuals for SOMFY LT50
Summary of Contents for SOMFY LT50
- Page 1 Somfy LT50/LT60 Wired Motors Limit Settings When you first install your motor or roll shutter, you must assume that the motor limits are not set. This will prevent damage to the roll shutter or motor. Using a test kit or wall switch, connect power to a single motor.
- Page 2 Press the down button on the switch and release the button when the motor reaches its lower limit. Press the corresponding limit switch button on the motor to set your lower limit. Press the up button on the switch and release the button when the motor reaches its upper limit.
Need help?
Do you have a question about the LT50 and is the answer not in the manual?
Questions and answers