DEEP WEAPON Upgrade Setup, Use, and Care Guide ADDENDUM For using with RED DSMC² Cameras...
Page 2
Introduction Page 2 Copyright 2016, Gates Underwater Products, Inc. Last document revision: 8 Feb 2016 This manual and current revision is available in 8.5 x 11 size and full color at http://www.gateshousings.com/documentation.html Gates Underwater Products, Inc. 13685 Stowe Drive Poway, California 92064 USA Phone: 858.391.0052 outside the U.S.
Setup, Use, and Care Guide ADDENDUM ....... 1 Introduction ............... 4 Warranty Disclaimer ............4 RED Items Required ............4 Unpacking the DEEP WEAPON Upgrade Kit ....5 Setup ................6 DSMC² Camera Setup ............6 WEAPON REDMOTE Link ..........7 Converting back to DSMC ..........
It is your responsibility to learn the proper setup, use and care of the DEEP WEAPON Upgrade. We warrant the parts provided with the DEEP WEAPON Upgrade for a period of 2 years. If you have any questions about this accessory kit, contact Gates directly. Details are in section 4.
Page 5 Unpacking the DEEP WEAPON Upgrade Kit The items included in your kit are listed below. If you discover any discrepancies, contact Gates or your dealer immediately for assistance. Kit Components WEAPON LCD Adapter & Cable DSMC Assign Control Head T20 Torx &...
2: Setup The instructions that follow are exceptions to the those found in the DEEP DRAGON SU&C Guide. DSMC² Camera Setup After stripping down the camera (per DEEP DRAGON SU&C Guide): Change camera settings to enable tethered communication to the REDMOTE. Go to Menu=>Settings=>Setup=>Communication and set Serial Protocol to REDLINK Command Protocol.
Setup Page 7 WEAPON REDMOTE Link The WEAPON REDMOTE Link allows the camera to communicate directly with the REDMOTE via a wired connection. Attach the WEAPON REDMOTE Link to the back of the REDMOTE. The WEAPON REDMOTE Link will snap onto the back of the REDMOTE.
Converting back to DSMC Page 8 3: Converting back to DSMC The DEEP WEAPON Upgrade can be modified to work with DSMC cameras by removing the Power Control Snap Spacer and switching out the Assignable Control Head. Assignable Control Head The WEAPON UPGRADE Kit comes with two different Assignable Control Heads in order to work with both DSMC or DSMC²...
Converting back to DSMC Page 9 Power Control Snap Spacer Your WEAPON Upgraded housing comes with a Power Control Snap Spacer installed. This spacer is provided to allow the power control to operate properly with DSMC² cameras. The spacer must be removed in order for the power control to reach a DSMC camera's power button.
Customer Support Page 10 4: Customer Support Should you have any questions about the DEEP WEAPON Upgrade, please contact Gates at the numbers below. Email: Customer.srvc@GatesHousings.com Web: www.GatesHousings.com Phone: 858.391.0052 Fax: 858.391.0053...
Need help?
Do you have a question about the DEEP WEAPON Upgrade and is the answer not in the manual?
Questions and answers