Advertisement
Quick Links
Normandy - Tall 3+3 Mirror Robe
Assembly Instructions -
Dimensions
Width - 149.5cm
Depth - 50cm
Height - 199.5cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
355/6324
338/3267
357/5563
MADE IN
BRITAIN
Issue 1 - 30/09/14
Advertisement
Related Manuals for Argos Normandy Tall 3+3 Mirror Robe
Summary of Contents for Argos Normandy Tall 3+3 Mirror Robe
- Page 1 Normandy - Tall 3+3 Mirror Robe Assembly Instructions - 355/6324 Please keep for future reference 338/3267 357/5563 Dimensions Width - 149.5cm Depth - 50cm MADE IN Height - 199.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 1 - 30/09/14...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 108kgs. space to layout the parts before recommend the Please lift with care. starting.
- Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Large Shelf (D2052A) (965 x 467mm) 12 Back Rail (D2053A) (965 x 120mm) Left Side Right Side...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the 3 drawer fronts Screw 2 metal dowels into each of the drawer fronts Note: Tighten the metal dowels up fully against the panels.
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 8 Prepare the divider Place a runner the divider . Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Finished Slide the runner front edge back the other way and fit the 2nd screw into the corresponding hole...
- Page 8 Assembly Instructions Step 9 Prepare the horizontal Insert 4 large locking nuts into the horizontal Tap 2 wooden dowels Finished into the horizontal front edge Step 10 Fit the horizontal to the divider Push the horizontal onto the divider Use a screwdriver to tighten the 2 large Finished locking nuts...
- Page 9 Assembly Instructions Step 12 Fit the small divider to the horizontal Push the small divider onto the horizontal Use a screwdriver to tighten the 2 large locking nuts fitted to the horizontal Step 13 Prepare the base Insert 4 large locking nuts into the base Tap 2 wooden dowels...
- Page 10 Assembly Instructions Step 15 Prepare the left side Screw 5 metal dowels into the left side Finished Fit 4 hinge plates onto front edge the left side , making sure that the slot is facing towards the finished front edge. Insert 2 large locking nuts into the left side...
- Page 11 Assembly Instructions Step 17 Fit the right side to the base Push the right side onto the base Use a screwdriver to tighten the 2 large locking nuts fitted to the base Step 18 Prepare the 2 plinths Insert 2 large locking nuts into each of the plinths...
- Page 12 Assembly Instructions Step 20 Fit the back rail and the plinths Push the back rail onto the divider Finished Use a screwdriver to top edge tighten the large locking fitted to the back rail Push each plinth onto the right side Use a screwdriver to tighten the large locking fitted to each...
- Page 13 Assembly Instructions Step 22 Prepare the top Screw 6 metal dowels into the top Rounded front edge Step 23 Fit the top and plastic nails Push the top onto the assembly. Use a screwdriver to tighten the 6 large locking nuts fitted to the left side , right...
- Page 14 Assembly Instructions Step 24 Fit back panels The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that measurement x:x equals y:y.
- Page 15 Assembly Instructions Step 25 Fit the hanging rails You can fit the 2 long hanging rails and 2 short hanging rails using any of the posi- tions shown opposite. Note: The short rail at position 4 is used for shoe storage. Short Rail Position 1 Insert 2 rail holders...
- Page 16 Assembly Instructions Step 26 Small shelf Fit the shelves Position 1 Large shelf Insert 4 shelf studs Position 1 position 1 or 2 for the large shelf and the small shelf Small shelf Position 2 Lower the large shelf Large shelf and the small shelf Position 2 down onto the shelf...
- Page 17 Assembly Instructions Step 28 Fit doors and handles Note: The easiest way to attach each door is to fit the top hinge first, then align and fit the other hinges. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
- Page 18 Assembly Instructions Step 29 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
- Page 19 Assembly Instructions Step 30 Wall fixing Washer Screw Fit the overbalance (not supplied) (not supplied) protector Washer Screw To prevent possible overbalancing we recommend that this unit Strap is secured to a suitable wall by use of the overbalance protector kit fitted to the unit or, an alternative fixing method of your choice.
- Page 20 KEEP THESE INSTRUCTIONS FOR FUTURE USE If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR3085...
Need help?
Do you have a question about the Normandy Tall 3+3 Mirror Robe and is the answer not in the manual?
Questions and answers