Related Manuals for WAGNER FineCoat 9900
Summary of Contents for WAGNER FineCoat 9900
- Page 1 ® Owner’s Manual FineCoat Coating System Model 0524016 FineCoat 9900 Edition 10 / 2010 0524 834B...
-
Page 2: Table Of Contents
Spray pattern selection ..............5 Spare parts list, turbo-blower FineCoat 9900 ......14 Setting the required spray pattern ..........5 Spare parts list, air hose FineCoat 9900 ........16 Setting the spray jet width ............6 Connection Diagram ............... 17 Setting the amount of material............. - Page 3 HAZARD: EXPLOSION OR FIRE HAZARD: SKIN BURN INJURY Solvent and paint fumes can explode or ignite. Severe Heated parts can cause severe skin burn injury. injury and/or property damage can occur. PREVENTION: PREVENTION: • Provide extensive exhaust and fresh air introduction •...
-
Page 4: Introduction To Spraying Using The Finecoat Procedure
7.5 A Description of Functions Max. air ram pressure 0.68 bar 21 000 rpm The “FineCoat 9900” spray application system consists of a Weight (turbo-blower, turbo-blower which supplies a FineCoat paint spray gun with air hose and spray gun) 15 kg atomizing air via an air hose. -
Page 5: Preparing The Coating Material
Preparing the coating material Setting the FineCoat Spray Gun Observe the manufacturer’s instructions for the use of the coating Spray pattern selection (fig. 2) material on the paint tin or on the technical instruction sheet. A = vertical flat jet for horizontal surfaces Coating material purity: B = horizontal flat jet for vertical surfaces An absolute pre-condition for the trouble-free operation of the... -
Page 6: Setting The Spray Jet Width
Setting the spray jet width (fig. 4) Setting the amount of air (fig. 6) The correct setting for the amount of air is decisive for the Adjusting ring atomization and formation of paint mist. Turn to the right = wider spray jet Turn to the left = narrower spray jet Note: The adjusting ring does not fasten the air cap! -
Page 7: Spraying Technique
Spraying technique Breaks in work Hold the paint spray gun upright and maintain a constant • Turn the material regulating knob to the right as far as it distance of about 3 - 20 cm to the object being sprayed. will go (fig. -
Page 8: Changing The Nozzle
9. Switch the unit off. 10. Clean the outer surfaces of the paint container and paint spray gun with a cloth soaked in solvent or water. Note: Do not leave the FineCoat spray gun immersed in solvent for extended periods! (The seals and air pipe on non-return valve may swell, preventing them from functioning properly.) 11. -
Page 9: Spray Gun Accessories And Spare Parts
10 pcs. Part No. 0277 919 once per year or every 500 hours of operation. Please contact your WAGNER service center. Service-Set consisting of seal item 5, page 12, seal item 8, seal item 17, needle seal item 27, air pipe item 32, non-return valve item 34, air pipe item 35, paint container seal item 49. -
Page 10: Special Accessories
Special accessories WSL 60 Spray lance (fig. 21) RN 30 Extension Tip (fig. 19) When coating materials can be used? for ribbed radiators, length 30cm. Coating materials which, due to their properties, cannot be used Part No. 0261 020 with a paint spray gun, e.g., liquid wood chip, multi-color effect coating, ornamental plaster, texture and spray filler, etc. -
Page 11: Troubleshooting
Fine-wire fuse defect. Have checked and replaced by a specialist electrician. ON/OFF switch defect. Have replaced by a specialist electrician. Motor defect. Call WAGNER service. No coating material flow from Tip clogged. Clean tip. the tip. Non-return valve (34)* clogged. -
Page 12: Spare Parts List, Finecoat Spray Gun
Spare Parts List, FineCoat spray gun... - Page 13 Item Part No. Description Item Part No. Description 0277 035 FineCoat paint spray gun 0277 505 Nipple 0277 502 Material adjusting knob 0275 579 Needle seal 0295 575 Pressure spring 0277 198 Trigger 0276 228 Nozzle set no. 4 (consists of air cap, tip 0277 514 Axle and needle)
-
Page 14: Spare Parts List, Turbo-Blower Finecoat 9900
Spare Parts List, turbo-blower FineCoat 9900... - Page 15 Item Part No. Description Item Part No. Description 0277 979 Ring, air outlet retaining 0277 469 Foam disk 0277 439 Threaded pipe 0277 997 9803 103 Screw (2) 0277 669 Spacer (3) 0277 443 0524 231 Motor with turbine 230 V~, 50/60 Hz 0277 442 Housing 9821 512...
-
Page 16: Spare Parts List, Air Hose Finecoat 9900
Spare Parts List, air hose FineCoat 9900 Item Part No. Description 0276 439 Seal quick-release coupling 0275 625 Hose quick-release coupling 0277 234 Air hose, 7,5 m 0524 405 Hose whip 152 cm long... -
Page 17: Connection Diagram
Connection Diagram (P/N 9850 936) (P/N 0524 598) (P/N 0277 940, 230V) (P/N 0277 938, 110V) (P/N 0279 426) (P/N 0277 194, 230V) (P/N 0277 193, 110V) (P/N 9850 577) (P/N 0508 103, 230V) (P/N 9850 937, 110V) (P/N 0276 595, 230V) (P/N 0277 207, 110V) Blue Brown... -
Page 18: Wagner-Service Companies
Shibei Industrial Zone • Shanghai, 200436 China Tel. 0086/2166521858 • Fax: 0086/2166529819 • wagnersh@public8.sta.net.cn France J. Wagner France S.A.R.L. • Parc de Gutenberg - Bâtiment F • 8 voie la Cardon • 91127 Palaiseau Cedex Tel. +33/1/825 011 111 • Fax: +33/1/698 172 57 • division.batiment@wagner-france.fr Italia Wagner Colora S.R.L. -
Page 19: Important Notes On Product Liability
(employer´s liability insurance association and factory inspectorate division). Only the usage of original WAGNER accessories and spare parts guarantees that all safety regulations are observed. 3+2 years guarantee for professional finishing Wagner professional guarantee (Status 01.02.2009) -
Page 20: Ce Declaration Of Conformity
2002/96/EC, 2006/95/EC, 2006/108/EC, 2006/42/EC and will dispose of it for you in an environmentally friendly way. Please ask your local Wagner service centre or dealer for details or on the approximation of the laws of the member states relating to the contact us direct.
Need help?
Do you have a question about the FineCoat 9900 and is the answer not in the manual?
Questions and answers