JVC KB-700 Service Manual page 9

KB-700 B/N/H
4. Removal of PC board
Refer to Fig. 11. Remove 10 screws fixing switches in the hole of the CP board and 4 screws fastening the board.
Slide volume control knobs can be removed by pulling the board upwards.
5. Removal of manual keys
1) After completion of the above item 4, remove 8
screws fastening the key chassis to remove the chassis.
2) Removal of key
Depressing the point C of the figure puli it in the
direction of D to remove.
When removing a black key, first remove two white
keys next to it and remove the black key in the same
manner as for white keys.
Fig. 12
6. Removal of the music stand (smoked cover)
Remove screws inside (see Fig. 14), and push the cover
holder with a screwdriver and the like in the direction
of the arrow mark (removal on one side only). After
that stand the cover and it will be removed easily.
3) Fitting of keys
Taking care about setting a coil spring on the projec-
jection of the key chassis, press the point E and insert
the key into a square hole F.
Fig. 14
9