Page 3
> 2.3 Suggest using 60227 IEC 53(RW) ordinary polyvinyl chloride sheathed cord. Nominal cross-sectional area of conductors is 3×0.75mm² (suited for FV-24JR2) or 4×0.75mm² (suited for FV-24JA2). It may cause damage to the product or a fire may be caused.
Page 6
Please wear gloves during the installation. WARNING...
Page 7
CAUTION Loosen the terminal box cover screws (2 pcs) and cord clip screws (2 pcs), connect the power cord to the wiring terminal block according to wiring methods below. (The detailed wiring methods please refer to wiring diagram page 8.) Screwdriver Screws Screws...
Page 8
Put the power cord into the terminal box before wiring. Wiring terminal Green Brown block Live (L) Neutral (N) ground(G) (Green/yellow) (Green/yellow) earth ground(G) earth Cord clip Power cord (not supplied) Green/yellow Blue Wiring terminal Brown Green Black block Signal wire Live (L) Neutral (N) (Green/yellow)
Page 11
After finishing the ceiling job, fill gap between flange and joist plate with caulk or other sealant to prevent air leakage. Caulk or other sealant...
Page 14
WARNING Children should be supervised to ensure that they do not play with the appliance.
Page 16
Web Site: http://www.panasonic.com 2015 P0915-0 24JR20423...