List Of Parameters For Relay Output; Parameter Setting - Mitsubishi Electric 800 Series Instruction Manual

3.3

List of parameters for relay output

When the FR-A8AR is mounted on the inverter, the following parameters are extended.
Perform the settings as required.
Pr. Pr. Group
320 M420
321 M421
322 M422
418 M432
3.4

Parameter setting

 Setting output signals
Use Pr.320 to Pr.322 to assign signals to the terminals ABC (1 to 3). The settings of Pr.320 to Pr.322 are the same as those of
Pr.190 to Pr.196 (output terminal function selection). For the details of Pr.190 to Pr.196, refer to the FR-E800 Instruction
Manual (Function).
NOTE
• All the outputs are shut off when the protective functions (E.1) are activated.
• Negative logic cannot be set.
Name
RA1 output selection 0
RA2 output selection 1
RA3 output selection 4
Extension output terminal
9999
filter
Initial value
The setting range depends on the inverter. For details,
refer to the description of Pr.190 to Pr.196 (Output
terminal function selection) in the FR-E800 Instruction
Manual (Function).
5 to 50 ms, 9999
Setting range
RELAY OUTPUT
3
23