Advertisement
Keep these instructions for future reference as they contain important information.
What's Included
X1
X1
X1
X1
Helpful Hints
C
Track marking codes are found on the bottom of tracks and riser.
Note: Some engines may not work on this track set.
Adult assembly required.
The engine's body also glows in the dark. Expose the engine to light, then watch it glow in the dark. Place product approximately 5 feet (152 cm)
away from a light source for 30 seconds. Placing product closer will not intensify the "glow-in-the-dark" feature. Glow-in-the-dark feature will last
longer if you do not expose this product to intense heat or direct sunlight for prolonged periods of time.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or
an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre son fonctionnement.
NIGHT DELIVERY
INSTRUCTIONS
X1
X1
X2
X2
RB2
RB1
X2
AR
X2
ES3
No tools needed.
X1
X1
X1
S1
X6
C
X2
X1
ONE-TIME SNAP: Assembly step that is marked with a star is a
"one-time snap." Once this part is put together, it cannot be taken apart.
Metal engines will not activate motorized features of TrackMaster™ playsets.
X1
X1
TU4
X1
Advertisement
Table of Contents
Related Manuals for Fisher-Price Thomas & Friends Track Master Hyper Glow Night Delivery
Summary of Contents for Fisher-Price Thomas & Friends Track Master Hyper Glow Night Delivery
- Page 1 NIGHT DELIVERY INSTRUCTIONS Keep these instructions for future reference as they contain important information. What’s Included Helpful Hints Track marking codes are found on the bottom of tracks and riser. ONE-TIME SNAP: Assembly step that is marked with a star is a "one-time snap."...
- Page 2 Assembly Battery Information BATTERY INSTALLATION Access the battery compartment by unscrewing and separating the top half of the engine from the bottom half of the engine. Install the batteries as indicated inside the battery compartment. Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to malfunction, check the battery installation.
- Page 3 Track Layout How To Play Note: If the engine runs continuously for approximately 3 minutes, it will automatically shut off to preserve battery life. To resume play, press the button on the engine. Once the tail lights are on, the engine is ready to charge and activate glow-in-the-dark track.
- Page 4 How To Play Load the cargo into the cradle . Wind Cranky in the direction shown until he locks into place. Note: Ensure the crate is upright, with the handle on top, exactly as shown in the image. As the engine passes the loading area, As the cargo car passes, it tips the cradle and Cracky will spin and hook the cargo crate, triggers the cargo crate to fall down into it.
Need help?
Do you have a question about the Thomas & Friends Track Master Hyper Glow Night Delivery and is the answer not in the manual?
Questions and answers