Before You Begin; Pairing Your Appliance - Sharp Microwave Drawer SMD2489ES Wi-Fi Connect Manual

2. BEFORE YOU BEGIN

• Plug in and power on Microwave Drawer
• Ensure your mobile device is connected to a 2.4 GHz Wi-Fi network and disable
Auto-Reconnect / Auto-Join for any other home networks previously setup on your device.
• Ensure that your chosen Wi-Fi network has a good signal strength in the area where you install
your Microwave Drawer™.
• Please have your home network Wi-Fi name (SSID) and password readily available.

3. PAIRING YOUR APPLIANCE

Sharp Kitchen
• Launch the
Microwave Drawer
• If you are pairing your Microwave Drawer™ for the first time select
• After completing the following tasks select
SHARP ELECTRONICS CORPORATION
app and sign in. Follow instructions below to connect your
to the Internet, then pair your app to your appliance.
™
Note: Please turn on Remote Start before pairing your oven.
Press [TIMER/SETTINGS] 3 times and then press [START/+30 SEC] key.
™
IN THE APP
[Pair a New Oven]
[GET STARTED] on your mobile device.
QUICK START GUIDE
SMD2489ES
Microwave Drawer
on your mobile device.
Android
™
[ALLOW]
• Press to
continue pairing.
™
4