Related Manuals for Advante H2O Plus
Summary of Contents for Advante H2O Plus
- Page 2 1. Select a indoor premise especially where there is free of direct sun rays, dampness and / or rain to install this H2O Plus Water Filtration System. 2. Install the System on a hard, firm surface or flat floor. Unbalance installation may cause noise and trembling.
- Page 3 5. Fill in clean, drinkable tap water into the Water Filtration Container until it is full. 6. Allow 10-15 minutes for the water to be filtered anf flow into the dispenser’s heating and cooling compartments. Make sure water can be dispensed from the HOT G and COLD H water taps before proceeding to the next step.
- Page 4 SAFETY INSTRUCTIONS • This dispenser is designed for INDOOR USE ONLY and should not be used outdoors. • Always turn off and unplug before proceeding to any maintenance or cleaning. • Repair or replace immediately, all electrical cords that have become frayed or otherwise damaged.
Need help?
Do you have a question about the H2O Plus and is the answer not in the manual?
Questions and answers