1PBROADBAND technicolor DGA4231 Quick Setup Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

DGA4231

Quick Setup Guide

Table of Contents

Need help?

Do you have a question about the technicolor DGA4231 and is the answer not in the manual?

Questions and answers

Summary of Contents for 1PBROADBAND technicolor DGA4231

Page 1 DGA4231 Quick Setup Guide...
Page 2 1. Before you start Carefully read the Safety Instructions and Regulatory Notices document included in your package before continuing with the installation of your DGA4231. 2. Check the content of your package Your package contains the following items: Item Description One DGA4231 User Documentation (this Quick Setup Guide, Safety Instructions &...
Page 3 3. Connect your DGA4231 to the Broadband service Choose your setup To connect your DGA4231 to the Internet you can either: • Directly connect your DGA4231 to your service provider’s DSL network. In this gateway. Follow the instructions from setup your DGA4231 is used as “Option A: DSL Gateway setup”...
Page 4 4. Connect your telephones to your DGA4231 Connect your corded phone or DECT base station to one of the green ports. 5. Power on your DGA4231 1 Plug the connector of the electric power supply adapter into the power inlet port ) of your DGA4231.
Page 5 6. Connect your network devices We recommend you to first connect one computer/tablet (if possible via a wired connection), then complete the rest of the procedure and as a final step connect the other devices. 6.1. Connect your wired (Ethernet) devices If you want to connect a device using a wired (Ethernet) connection: 1 Take the Ethernet cable with the yellow connectors.
Page 6 Wi‑Fi settings label On the back panel of your DGA4231 you can find a label with useful information about the Wi‑Fi access point: • The Network Name. This name is used to identify the access point. Some use the term SSID instead. •...
Page 7 7. Configure your DGA4231 to your needs (optional) The DGA4231 web interface allows you to configure your DGA4231 using your web browser. To access the DGA4231 web user interface: 1 Browse to http://192.168.1.1 on a computer or device that is currently connected to your DGA4231 (either wired or over Wi‑Fi).
Page 8 8.3. How to reset your DGA4231 If at some point you want to restore the default settings, proceed as follows: 1 Make sure that your DGA4231 is turned on. 2 Use a pen or an unfolded paperclip to push the recessed Reset button on the at least 10 seconds back panel of your DGA4231 for and then release it.