Hitachi BD-D80CVE Instruction Manual page 12

Installation
Checking operation
Checking after installation
1
Turn on the water tap and close the washing machine door.
2
Press the Power button to power on.
3
Select the cotton programme and press the Start/Pause button.
4
After 5 minutes, check if there is no water leakage from anywhere.
5
Press the Power button to power off.
6
Press the Power button again to power on.
7
Select the Spin programme and press the Start/Pause button.
8
Check if there is no abnormal vibration or sound, and that water is drained out properly.
If any of the following conditions or other abnormalities occur, immediately pull out
the power plug to prevent an accident and contact your local service center.
● The washing machine does not operate when you power on.
● The power cord has cracks.
● There are abnormal vibrations and sounds during operation.
● There is a smell of burning.
12