Remote Control Instructions; Wired Operation; Wireless Operation - Harbor Freight Tools Badland Apex Owner's Manual & Safety Instructions

Remote Control instructions

Wired Operation

1. To use the Remote Control in a wired
configuration, connect the Remote Control Cable
to the bottom of the Remote Control and to the
Remote Control Socket on the Control Box.
Red indicator Light
Blue indicator Light
in OuT
Rocker
Switch
2. The blue indicator light will come on indicating
the Remote Control is ready for use.

Wireless Operation

1. For wireless Remote Control operation, turn on
the Wireless Receiver Switch on the Control Box.
Wireless Receiver Wireless Receiver
Control Control
Box Box
2. Press and hold the ON/OFF Switch on the
Remote for approximately 2 seconds until
the red indicator light comes on, indicating
the Remote Control is ready for use.
Red indicator Light
in OuT
Page 12
Remote
Control Socket
Remote
Control Cable
Switch Switch
On/OFF
Switch
Rocker
Switch
For technical questions, please call 1-888-866-5797.
3. With the Clutch Handle in the Engaged
position, press IN on the Rocker Switch
to retract the Synthetic Rope — the red
indicator light will flash during winding.
in
4. Press OUT on the Rocker Switch to
extend the Synthetic Rope out.
3. With the Clutch Handle in the Engaged
position, press IN on the Rocker Switch
to retract the Synthetic Rope — the red
indicator light will flash during winding.
4. Press OUT on the Rocker Switch to
extend the Synthetic Rope out.
in
5. To turn off the Remote Control, press and
hold the ON/OFF Switch until the red indicator
light goes out, approximately 2 seconds.
Turn off the Wireless Receiver Switch.
note: The Remote Control will automatically shut itself
off after 2 minutes of inactivity to save the battery.
OuT
OuT
Item 56385