Similar to the transmitter, the MPD part numbering system defines
the agency approval and thread type (i.e., port configuration).
The only material selection is stainless steel. Four sensor types
are available. Agency approvals are specific to these four sensor
types (see
Sensor
Data). Ensure that the approval of the sensor
type meets the requirements of the installation.
Catalytic Bead and IR Replacement Sensor Cartridges
Cartridge
Sensor
Target Gas
Part
Type
1, 2
Number
MPD-IC1
Carbon Dioxide
1226-0301
Methane
1226-0299
MPD-IV1
Methane
1226-0299
MPD-IF1
Flammables
1226-0300
MPD-CB1 Flammables
1226A0359
1.
Agency approved hydrogen sensors are MPD-CB1 and 705 STD.
2.
When ordering replacement MPD sensor cartridges, the replacement cartridge must be the same type as factory configured. Substituting a different cartridge will void agency
certification.
3.
On XNX %LEL units carrying UL/CSA certifications, the range is fixed at 100%LEL and is not adjustable.
Need help?
Do you have a question about the XNX-AM Series and is the answer not in the manual?
Questions and answers