Related Manuals for CleanMax PRO Series
Summary of Contents for CleanMax PRO Series
- Page 1 LEAN OPERATING INSTRUCTIONS FOR C PRO SERIES LEAN UPRIGHT VACUUMS MODELS : CMP-3QD CMP-3T CMP-3N Before operating the vacuum, please read these instructions completely.
-
Page 3: Table Of Contents
Index Important Safety Instructions............................... 2 Grounding Instructions................................3 Parts Identification................................4-5 Replacement Bags/Filters..............................4-5 How to Assemble and Operate the Vacuum........................6 How to Change the Vacuum Bag............................7 How to Change the Filters..............................7 Handle Adjustments.................................8 Edge Cleaning Feature. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE IMPORTANT: The manufacturer cannot accept responsibility for damage caused when the appliance is not used according to the instructions, or for uses other than those for which it was intended. -
Page 5: Grounding Instructions
Grounding Instructions This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. -
Page 6: Parts Identification
• Genuine CleanMax Vacuum Filters Part # CMP-12 (12 per package) Part # CMPS-HEPA (1 per package) (HEPA Media Filter) • Genuine CleanMax Vacuum HEPA Media Bags Part # CMH-6 (6 per package) Part # CMPS-SF (1 per package) (Electrostatic Secondary Filter) •... - Page 7 • Genuine CleanMax Vacuum Filters Part # CMP-12 (12 per package) Part # CMPS-HEPA (1 per package) (HEPA Media Filter) • Genuine CleanMax Vacuum HEPA Media Bags Part # CMH-6 (6 per package) Part # CMPS-SF (1 per package) (Electrostatic Secondary Filter) •...
-
Page 8: How To Assemble And Operate The Vacuum
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner The vacuum cleaner and the handle are packed separately. 1. Remove the handle screw, insert handle into the hole on top of the vacuum cleaner (Fig. 1). 2. -
Page 9: How To Change The Vacuum Bag
How to Change the Vacuum Bag Always operate the vacuum cleaner with a vacuum bag installed. Bags should be changed when they are 2/3 full. To Change the Vacuum Bag 1. Unplug the vacuum cleaner. Remove the bag compartment cover, and remove the used bag from the bag holder (Fig. 1). 2. -
Page 10: Handle Adjustments
Handle Adjustments The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low. How to Adjust the Handle 1. To release the handle, step on the on the left rear corner of the vacuum cleaner nozzle (Fig. -
Page 11: On-Board Tool Cleaning
On-Board Tool Cleaning Model: CMP-3QD This model is equipped with on-board cleaning tools including a metal telescopic Quick Draw wand, stretch hose, dusting brush and crevice tool. 1. To use the cleaning tools, lift the hose handle straight up from the vacuum (Fig. 1). 2. -
Page 12: How To Replace The Vacuum Belt
How to Replace the Vacuum Belt CAUTION: Unplug the vacuum cleaner before performing any of these steps. How to Remove the Bottom Plate 1. Place the vacuum cleaner in the low position by pressing the foot pedal release twice while reclining the handle. Turn the vacuum over. -
Page 13: How To Clean The Nozzle Hose
How to Clean the Nozzle Hose CAUTION: Unplug the vacuum cleaner before performing any of these steps. The nozzle hose carries the dirt from the nozzle to the vacuum bag. If the hose should become clogged: Model: CMP-3QD 1. Remove the wand from the wand/hose holder. 2. -
Page 14: Thermal Fuse Protection
Thermal Fuse Protection This vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. The thermal protector is designed to protect the vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off the vacuum cleaner to avoid any potential damage. -
Page 15: Warranty
• Normal replacement items: disposable vacuum bags, disposable filters and belts. What CleanMax Will Do: This warranty provides, at no cost to you, all labor and parts to keep this vacuum in proper operating condition during the warranted period. - Page 16 LEAN CleanMax Vacuum Cleaners PO Box 730 Fenton, MO 63026 cleanmaxvacuums.com ©2018 CleanMax Vacuum Cleaners.
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers