Maintenance - STEMCELL RoboSep-16 User's Reference Manual

vi
Empty the RoboSep™-16 waste bin (section 1.3.4) only after a run is
complete or the instrument is paused. Before initiating a run, ensure there
is adequate space remaining in the waste bin to hold tips that will be used
during operation.
Do not overfill reagent containers, tubes, or other liquid containers.
Promptly clean any spills around the instrument. Clean any spills in
RoboSep™-16 only after a run is complete or the instrument is paused.
Do not remove the instrument side covers under any circumstances.
Always have the door closed when executing runs. During operation, the
instrument arm may move suddenly causing bodily harm.
Contact STEMCELL Technologies Technical Support anytime you believe the instrument has lost accuracy or
precision in any motion axis.

Maintenance

If RoboSep™-16 becomes contaminated with biohazardous or chemical
material, clean it as described in section 8.0.
Observe and carry out the maintenance procedures given in section 8.0.
Failure to do so may impair the reliability and correct functioning of
RoboSep™-16.
Preventive maintenance beyond daily and weekly maintenance, cleaning,
and decontamination must only be performed by an authorized STEMCELL
representative.
Do not use an isopropyl alcohol-based solution to clean the door.
STEMCELL TECHNOLOGIES INC.'S QUALITY MANAGEMENT SYSTEM IS CERTIFIED TO ISO 13485 MEDICAL DEVICE STANDARDS.
FOR RESEARCH USE ONLY. NOT INTENDED FOR HUMAN OR ANIMAL DIAGNOSTIC OR THERAPEUTIC USES.
TOLL FREE PHONE 1 800 667 0322
INFO@STEMCELL.COM TECHSUPPORT@STEMCELL.COM

PHONE +1 604 877 0713

FOR GLOBAL CONTACT DETAILS VISIT WWW.STEMCELL.COM

VERSION 01
DOCUMENT #10000005574