Mounting The Seat Tube And The Slider Tube - DT SWISS D 232 Technical Manual

MOUNTING THE SEAT TUBE AND THE SLIDER TUBE

Required Material
REPLACEMENT SPRING
SEAT TUBE REPLACEMENT
universal grease
*The service kit only needs to be replaced if there is a seat post malfunction (see "Trouble Shooting"
on page 14). In case of malfunction, all parts of the required service kit should be replaced.
1. Grease the coil spring and push the coil spring
into the spring guide of the seat tube.
2. Grease the inner surface of the slider tube
and the guide parts of the seat tube and slide
the slider tube onto the seat tube.
→ The guide key of the seat tube must slide
into the guide groove in the slider tube.
3. Press the slider tube downwards against the
spring force and screw on the lock nut at the
same time.
4. Tighten the lock nut firmly by hand.
38
Specification
Art. No.: DWKD232N30522S
Details, see "Service Kits" on page 7
D 232 Ø27.2 Art. No.: DWKD232S30523S
D232 Ø30.9 Art. No.: DWKD232S30524S
D232 ONE Ø27.2 Art. No.: DWKD232C30525S
D232 ONE Ø30.9 Art. No.: DWKD232C30526S
Details, see "Service Kits" on page 7
Slick Honey
Quantity
1*
1*
as required