Page 3
ETY NST CT ONS 1. This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
PRODUCT OPERATION Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on. The unit will conduct an automatic self-diagnostic test to ensure accurate counts. After five seconds of the counting wheels spinning, the screen will display a "0". If there is a problem, the preset display will show an error code.
Page 8
PRODUCT OPERATION (CONTINUED) Counting Speeds Press the "SPEED" button on control panel and continue to press the key until you come to speed setting you wish to use (900, 1,200, 1,500). Counterfeit Detection Methods All methods are automatically on when the unit is powered up. To manually turn off any or all methods see (CONTROL PANEL - LOCATED ON PAGE 5.) AUTO or MANUAL Start The machine is preset to automatically start counting bills once placed into the hopper.
Page 9
C NE C T ON O NOT C N E T E OS T ON O T E ETECTO S N O O T C SENSO S S EC C T ONS Model RBC-1515-ADBK single-phase 100~240V 50/60Hz (±10%) Power Power Consumption...
TROUBLESHOOTING Problem Reason Solution Bills get damaged Hopper To loosen the tension, please turn the bill thickness adjuster (located on the top Machine runs slow Tension is of the machine) one notch to the right (+). Repeat bill counting and adjust if too tight problem continues.
ERROR CODE DISPLAY AND SOLUTIONS The display may show some error code in counting, which means there are some problems with the machine. Refer to the chart below to solve the error. Error Code Reason Double-notes. Put the notes from the stacker onto the hopper again, press START to count again.
Need help?
Do you have a question about the RBC-1515-ADBK and is the answer not in the manual?
Questions and answers