Using The Electric Steriliser; Using The Microwave Steriliser - MAM Easy Start Anti-Colic Manual

To achieve a disinfection effect up to 48h, the maximum number of products sterilised together shall
not exceed:
number of bottles
number of pacifiers

1.1. Using the Electric Steriliser

Fig. 1
1.) Correct assembly of the Electric Steriliser is illustrated at the beginning of Section 1.
2.) Check that the sealing ring is pressed down firmly in its place, this never needs to be removed.
3.) Pour 200ml/7 fl oz tap water directly into the Base (Fig. 1).
4.) Fix the Steriliser Base Cover onto the Base using the grooves to "fit and twist" the cover (Fig. 2).
5.) Place the disassembled bottle and components in the upper and lower Baskets of the Steriliser.
6.) Close the Steriliser. The Steriliser Lid must "click" into place.
7.) Place the Steriliser on the Base Cover (Fig. 3).
8.) Insert the plug into the wall socket. Place it on a flat, stable surface.
9.) Switch the device ON
beep.
10.) Press the programme selection button
beep is heard and the light flashes constantly while the programme is running.
11.) The programme will run for 7 minutes and will automatically stop afterwards with 3 long beeps. Light
stops flashing.
12.) Cooling down period starts: all 4 LEDs are lit. Allow the Steriliser to cool before removing the lid. Cooling
period will automatically stop after 4 minutes along with 3 long beeps.
13.) Press OFF to turn the device off. Pour out any remaining water from the Base and dry with a soft cloth.
The programme can be interrupted by pressing the programme selection button
interrupted – please restart the entire process.

1.2. Using the Microwave Steriliser

1.) Correct assembly of the Microwave Steriliser is illustrated at the beginning of Section 1.
2.) Open the latch on the Microwave Steriliser and remove the Steriliser Lid.
3.) Remove the Steriliser Upper and Lower Baskets as necessary.
4.) Close the blue Steriliser Valve on the bottom of the Steriliser Bowl.
5.) Pour 200 ml tap water into the Steriliser Bowl. Place the disassembled bottles and components in the
upper and lower Baskets of the Steriliser.
6.) Close the Steriliser. The Steriliser Lid must "click" into place. Place the Steriliser in the microwave.
7.) The Steriliser works with all commercially available microwave devices. There must be some space
between the microwave and Steriliser. Using a microwave that is too small can damage the steriliser
4
Easy Easy
Start Start
130 ml 160 ml 260 ml
4 4
7 5
Fig. 2
(Fig. 4). The light on the sterilising programme will appear, along with a short
for 2 seconds to start the sterilising programme (Fig. 8). A long
Easy Easy
Trainer+
Start Start
220 ml
320 ml
3 3 6
10 8 5
Fig. 3
Easy Easy Feel
Active Active Good
270 ml 330 ml 160 ml
5 4 3
5 10 5
Fig. 4
. If programme is
Feel
Good
260 ml
3
5