Table of Contents
Advertisement
Cleaning
● Always unplug the appliance before you clean it.
● Never immerse the appliance in water or any other liquid.
● Never use aggressive or flammable cleaning agents such as bleach or alcohol to
clean any part of the appliance.
● Only the pre-filter is washable. All other filters are NOT washable.
1. Body of the appliance
Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1) Wipe away dust with a soft dry cloth from the body of the appliance.
2) Clean the air inlet and the air outlet with a soft dry cloth.
2. Air quality sensor
Clean the air quality sensor every 2 months for optimal functioning of the
appliance. Clean it more frequently if you use the appliance in a dusty environ-
ment.
Note:
When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the Air Quality
light on the control panel and the air quality indicator may show that the air
quality is bad even though the air quality is good. In this case you have to
clean the air quality sensor or use one of the manual speed settings.
1) Clean the air quality sensor inlet and outlet
with a soft brush.
2) Remove the air quality sensor cover.
31
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RP-AP001S and is the answer not in the manual?
Questions and answers
After changing all filters and reinstalling, the #1 filter light blinks orange continuously.
I can’t get my Renpho purifer to pair on my modems WiFi no matter how many times I’ve tried, so now the WiFi light on the purifer keeps on blinking when it’s on. How do I turn off the WiFi light off so it quits blinking?
To turn off the WiFi light on the RENPHO RP-AP001S air purifier, press and hold the "Lock" and "AQ" buttons together for 5 seconds until the WiFi light starts blinking. This resets the WiFi and may turn off the light if the device is not connected.
This answer is automatically generated
@Mr. Anderson That’s the thing the device is not connected to my WiFi. I’ve tried pairing back my Renpho on the Gennic app again to reset the WiFi light to stop blinking but for some strange reason it won’t pair now. So the WiFi lights keeps on blinking while in use. Thanks for the quick response back.