Advertisement
Advertisement
Table of Contents
Related Manuals for Enerzen O-888
Summary of Contents for Enerzen O-888
- Page 1 O-888 Commercial Air Purifier...
- Page 2 OWNER’S MANUAL Please read all of the information provided in this owner’s manual before operating your new Enerzen commercial purifier.
- Page 3 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVCE PERSONNEL. This “bolt of lightning” indicates that uninsulated material within your unit may cause an electrical shock.
- Page 4 Read ALL instructions carefully before using this product. Model: O-888 Rated Voltage: USA/Japan AC 100-120V/50-60Hz Power Consumption: 100 W Ceramic Plate Size(1plate): 90X110MM Air Volume: Max 100 CFM(2.8 M /min) Sound Level(DB): 35 Db Product size(mm): W178xH148xD205MM Weight: 2.39Kgs(5.3Lbs)
- Page 5 Operating the Commercial Purifier (Front View) Timer Control Knob Turn clockwise to set the timer for timed operation up hours. Indicator Light Illuminates when the unit is in operation.
- Page 6 (Back View) Fuse Holder Houses removable fuse. (Spare fuse included, 2 amp, 0.79 inch in length) Power Cord 100~120 Volt grounded cord...
- Page 7 The Enerzen Commercial Ozone Generator and Air Purifier is designed to remove odors in unoccupied spaces. The unit has a timer that will enable it to run for a maximum duration of 2 hours. The timer will then shut the unit off. You should allow 40-60 minutes before returning to the treated area.
- Page 8 When the air purifier no longer produces enough ozone to be effective, the ozone plate should be replaced. How to replace a plate: 1) Turn the unit off and unplug from outlet. 2) Use a screw driver to unfasten cover screw and remove cover.
- Page 9 4) Install ceramic plate as shown in left figure (be careful not to drop the plate). If you suspect a problem with your unit check the following: 1) Unit is plugged in properly. 2) It’s important that the air purifier be properly grounded to avoid potential shock.
Need help?
Do you have a question about the O-888 and is the answer not in the manual?
Questions and answers
How long should I wait after returning to occupythe room after using the ionizer for two hours.
You should wait 40–60 minutes before re-entering the room after using the Enerzen O-888 ionizer for two hours.
This answer is automatically generated