WS001 Thank you for purchasing this device, Please read the operating instructions carefully to familarise yourself with the features and modes of operation before using the instrument. PACKAGING CONTENTS...
Page 5
Overview of icons and buttons Front side and display 10. Day of week 1. Outdoor Temperature 2. RF symbol 11.Alarm 12. Date 3. Weather forecast 4. Weather trend 13.Month 5. Indoor humidity 14.Time 15.Trend of outdoor 6. Indoor Temperature 7. Low battery indication indoor 16.
Correct way for mounting the outdoor sensor: Suggest the outdoor sensor to be hung on as below showing, better not stand it at outside place,try to avoid direct sun shine or rain as much as possible. Manual set-up 1.Press and hold key "MODE " for 3 seconds. 2.The 12/24 hour flashing.
Information: The clock automatically changes from set-up mode to time display mode if no keys are pressed for 15 seconds. Setting time manually 1. Press and hold the MODE button. 2. Set the 12/24 time format - hour - minute - year - month –day of week- languages of calendar by "+ "...
Daily alarm ON/OFF 1.When showing alarm time, press "ALARM " to activate the alarm with alarm symbol showing. 2.Press "ALARM " again cancel the alarm Information: 1.The clock automatically changes from set-up mode to time mode if no keys are pressed for 15 seconds. 2.The alarm sounds for 2 minutes if no key is pressed to stop it.
Trend of humidity and Weather forecast Weather forecast The weather station shows 5 animated weather forecast icons. 1.The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24 hours for an area within the range of 15–20 km. 2.Accuracy of weather forecast is 70–75 %.
Wireless connection to the outdoor sensor Press and hold the key “SEARCH“ for 3 seconds to search for outdoor sensor . Illumination 1.Press the key "SNOOZE/LIGHT" to activate the display illumination for 5 seconds. 2.There are 3 levels of the light by pressing the "SNOOZE/LIGHT" button when AC power on:Off backlight, Light on, More bright light Putting into operation 1.Insert batteries into the weather station (3 x AAA,LR03,1.5V),connect the 4.5V...
Specifications: Dimensions(L x W x H) Main station 110 x 145 x 45 mm Remote sensor 90.8 x 65 x 32.5mm Daily alarm set-up 1.Six keys: MODE, +, - , ALARM,SEARCH, SNOOZE/ LIGHT. 2.Colorful background illumination ( 3 level by pressing SNOOZE/LIGHT : off backlight, light on, more bright light) 3.Time display in 12/24 format 4.Continuous perpetual calendar up to 2099 5.Display of Date, Month and Day of week...
Station indoor Clock display HH:MM:SS Hour format 12hr AM/PM or 24hr Calendar MM/DD Weekday in 7 languages (EN, GE, FR, IT, DU,SP,DA) Battery: 3 x AAA, LR03, 1.5V AC 4.5V adaptor included Sensor outdoor Wireless sensor transmission frequency 433 MHz Transmitting distance up to 35 m in open area 1 channel...
Care and maintenance The product is designed to provide trouble-free service for many years if operated appropriately. Here is some advice for proper operation: 1.Read the manual carefully before using this product. 2.Do not expose the product to direct sunlight, extreme cold and moisture, and sudden changes in temperature.
Do not dispose of the product or the batteries after the end of life as unsorted municipal waste, use sorted waste collection points. Correct disposal of the product will prevent adverse on human health and the environment. Recycling of materials contributes to the protection of natural resources. For more information about recycling of this product, contact the municipal authority, organization for processing household waste or the point of sale where you purchased the product.
Page 15
Caution-material damage Never expose the weather station to severe temperature fluctuations, moisture, direct sunlight, dust or impacts. Protect the batteries from intense heat. Remove the exhausted batteries from the weather station.This will avoid damage that can be caused by leakage. Always replace all the batteries simultaneously.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2)This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the WS001 and is the answer not in the manual?
Questions and answers
How do I keep the light on for 24 hrs